Wire wound water filter element is high filteration rating and efficiency.
Port: TIANJIN
Minimum Order Quantity: 500 Piece/Pieces 100units
Supply Ability: 1000 Piece/Pieces per Day 1000units
Payment Terms: L/C,T/T
Contact Supplier
Packaging Detail: Can be packaged according to your requirements
Delivery Detail: One week in advance booking
Nominal(μm) | 0.5 | 0.8 | 1 | 3 | 5 | 10 | 20 | 30 | 50 | 80 | 100 | |
Original(μm) | 3-8 | 5-10 | 10-20 | 20-30 | 25-40 | 30-50 | 35-60 | 40-70 | 55-80 | 65-90 | 80-120 | |
Contaminant capacity(α) | 65 | 70 | 75 | 77.5 | 80 | 82.5 | 85 | 90 | 135 | 160 | 175 | |
Water flow rate(L/min) | 6 | 12 | 15 | 20 | 25 | 30 | 32 | 36 | 40 | 45 | 50 | |
Oil flow rate | 20cst | 1.2 | 1.4 | 1.7 | 3.2 | 4.6 | 5.9 | 10 | 20 | 22 | 26 | 27 |
| 30cst | 1.0 | 1.2 | 1.5 | 2.0 | 2.3 | 5.0 | 11 | 14 | 18 | 22 | 25 | |
| 60cst | 0.67 | 0.8 | 1.0 | 1.3 | 2.0 | 2.3 | 2.0 | 8.0 | 40 | 13 | 15 | |
| 120cst | 0.42 | 0.5 | 0.6 | 0.8 | 1.1 | 1.5 | 4.0 | 4.5 | 5.1 | 6.5 | 7.4 | |
Notes The above table is the water flow rate of PP filter element under the 0.015Mpa,the length 250mm, Cotton wool fiber×0.6, Polyacrylonitrile fiber×1.3.
Filter Selection Description
| Series Code | Filter Length | Filter Accuracy(μm) | Filter Layer | Skeleton materials | inside diameter |
| XRL XRLT | 250mm 500mm 750mm 1000mm 1750mm | 0.5 0.8 1.0 3.0 5.0 10 20 30 50 80 100 | P: Polypropylene M: Absorbent cotton B: Fiberglass | J:Stainless steel frame(NO marked as a polypropylene skeleton | OD:28 OD:30 |
Notes Our company can be wound diameter of 150mm, length of 2m below the arbitrary size, line filter specifications.
Model No.: QT-02
Features: ro water system fittings
quick fitting pressure tank valve
Model No.: CM01-39200
Features: ceramic membranes water filter element, 0.1 micron filter fineness and 99.9999% rate of removing bacteria
Model No.: QT-03
Features: ro water system fittings
quick fitting connector
Model No.: CM01-46230
Features: ceramic water filter cartridge,0.1 micron,remove 99.9999% bacteria
cleanable cartridge ,replace it easily.
Model No.: FILMTEC50
Features: reverse osmosis water filtration parts(RO membrane)
Be made of the semi-permeable membrane with the 0.1nm filtration precision
Model No.: PP-10D
Features: water filter system
PP cartridge
remove the particles, impurities and dust
Filtration precision:1,5,10micron
Model No.: CM05-3976C
Features: ceramic water filter cartridge
0.5 micron,large output large removes suspended contaminants,cleanable cartridge and replaceabe
Model No.: CSM
Features: ro water cartridge
Be made of the semi-permeable membrane with the 0.1nm filtration precision
Model No.: CM01-39200
Features: ceramic water filter element,0.1 micron,remove 99.9999% bacteria
cleanable cartridge ,replace it easily.
Model No.: CM01-55230C
Features: ceramic water filter cartridge,0.1 micron,remove 99.9999% bacteria
cleanable cartridge ,replace it easily.
Model No.: HDN-T1
Features: 1.activated carbon water filter element
Model No.: BH2
Features: 1.size:8*12*40cm
2. hydraulic pressure:10-125psi