vacuum tube solar heating collector - ADL

solar heating collector:

Specifications:

inner manifold : copper header,the thickness is 1.0mm
outer manifold: Aluminum alloy, the thickness is 2.0mm

the bracket : Aluminum alloy, the thickness is 2.5mm

Insulation layer : rock wool
Rubber Seals and Rings: UV stabilized high temperature silicon rubber
Optimal installation angle: 20-80 degree
Maximum Operating Pressure: 0.8 MPa / 116psi
Optimal flow rate: 0.1L/min/tube - 0.026G/min/tube
Glass tube dimensions: 58mm x 1.8m x 12-30 pcs
Heat pipe material: Copper
Heat preservation: 72hours
Hail resistance: 25mm
Inlet & Outlet: Ø22 or 3/4 inch

Detailed Product Description:

solar collector is designed with pressure up to 0.8Mpa.
Easy to use, also convenient to install
Can be put in the courtyard, on the roof or balcony
Inlet water hole connects to the tap water, and the outlet hole connects to the tap water, and the outlet hole produces pressure hot water directly
Efficiency: The advantage of solar tubes is that insulate the inner tube from heat loss. This means that once heat is absorbed, it is transferred to the water in the manifold, and not lost to the outside environment. This is the key difference between solar tubes and flat plate solar collectors: the insulative properties. Combined with heat transfer efficiency of the heat pipe, the collector can deliver excellent heat output all year round.
Aesthetics: solar collector is designed to be low profile, sitting closed to the surface of the roof. Tubes are black and so blend in nicely with most roof colors.
Heat pipe has its special principle and function, and no water in the pipe. If one of the pipe is broken, the heat collector still could be used normally.

Datas: