1.CE ,ISO9001
2.5 years guarantee,15 years lifetime.
3.Delivery time: 7 days
4.Price:$100-$300...
Brand Name: Gtai,
Port: shanghai or ningbo
Minimum Order Quantity: 1 Set/Sets
Supply Ability: 3000 Set/Sets per Month
Payment Terms: L/C,T/T,Western Union
Contact SupplierPackaging Detail: Standard Export Carton or wooden box for samples
Delivery Detail: 2 weeks for full containers
Advantages:
1. Can he operated completely automatic if connect with intelligent controller.
2. Simple structure, easy plug-in installation, can be installed both on flat and inclined roof, and can be used with an auxiliary electric booster as to provide tot water without sunshine.
3. Superior heat preservation ensured by one-off molding polyurethane foam with thickness 50 65mm.
4. Suitable for camping area, holiday residences.
5. Stable and reliable performance, well wind resistance.
6. Meet the mankind healthy bath standard: The material of inner tank is SUS304-2B stainless steel plate; The silica gel ring sealing has a long life against the erosion and it ie not harmful to health.
The details of material:
Evacuated tube: High quality borosilicate glass 3.3, Φ 47× 1500, Φ 58× 1800/2100, Φ 70× 2100
Inner tank: SUS304-2B stainless steel plate
Outer tank: Enamel steel plate
Insulating layer: Polyurethane foam
Bracket: Aluminum alloy
The Principle of thermosyphon
Because of the larger proportion of hot water than cold water, cold water flows downward and hot water goes upward. The water will be heated continuously between water tank and vacuum tube. In other wards, hot water always floats on cold water.
The hot-water flows to the water tank from the vacuum tubes. Because of the proportion, cold water flows to vacuum tubes from the water tank.
The cold water is heated in vacuum tubes. After it becomes hot water, it flows to water tank again. The water circulates constantly between water tank and vacuum tubes; The cold water in water tank will be hotter and hotter.
Finally, all cold water will be heated to be hot water. This is the heating course of cold water.
TECHNICAL PARAMETERS OF NON-PRESSURIZED SOLAR WATER HEATER | |
Description | Non-Pressurized Solar Water Heater |
Material of out tank | 0.31mm zinc-olor Steel |
Material of inner tank | Food grade 0.31mmSUS304-2BStainless Steel/0.4mm |
Tank insulating layer | 50mm high-density polyurethane foamed |
Diameter inner/out tank | 420/310mm OR 460/360mm |
Electrical Heater | 1.5kw |
Inlet and outlet hole | Male G 1/2, 3/4 |
Max pressure | 0.05 Mpa |
Solar collector tube | 3.3 Borosilicate glass with / AL/N/AL(Single target) or Triple target.ALN/AIN-SS/CU |
Thickness of glass tube | 1.6mm |
Vacuum tube tightness | P≤0.005 Pa |
Absorption | as=0.93-0.96(AM1.5) |
Emission ratio | εh=0.04-0.06(80C±5C) |
Idle sunning property parameters | Y=220~260m2.C/KW |
Average heat loss coefficient | ULT=0.6~0.7W/(m2.C) |
Bracket: | Galvanized steel 1.2mm |
Structure of tank: | 4 holes for air vent,overflow,water inlet and outlet,electric heater |
welding: | Argon arc welding |
fastening pieces: | Made of stainless steel screw |
Feeder tank | 5L Galvanized Steel Feeder Tank |