split solar hot water system - SJL-HP

split solar hot water system, 1.high efficience performance, 2.certificate:CE ISO CCC, 3.reasonable price - more info check here: //www.sourcingappliances.com/split-solar-hot-water-system-30110444/

Quick Brief

Type: heat pipe Pressure: Pressurized Circulation Type: Indirect / Closed Loop (Activ... Heating System: Thermosyphon (Passive) Connection Type: Split Installation: Freestanding Housing Material: Stainless Steel Certification: CE Capacity: 200 Place of Origin: Zhejiang China (Mainland) Brand Name: sijile Model Number: SJL-HP Use: bathing swimming pool Pipe material: glass Type: pressurized Connection type: split Brand name: seasonjoy solar water heater

Specifications and Product Details:

split solar hot water system

Heat pipe vacuum tube	Spec.(mm)	47×1500 58×1800 58×2000
	Tube(pcs)	15//18/20/24/30/36/42/50
	Material	Borosilicate glass/ rea copper heat pipe/aluminum fin
	Coating	Cu/SS-ALN(H)/SS-ALN(L)/ALN coating
Water tank	Capacity (L)	100/150/200/250/300/350/400/450/500
	Inner tank	Food-grade SUS 3042B stainless steel
	Outer tank	Galvainized steel alloy or coating steel board
	Insulation	Imporeted polyurethane integrated-foaming 60mm
Bracket	Spec.(mm)	1.2mm-1.5mm in thickness
Bracket	Material	Hot-dip Galvanized steel
Accessories	Stainless bolt, dustproof rubber seal, plastic pipe holder
Opptional device	Electrical heater, intelligent controller, anod magnesium bar, T/P valve
Working pressure	0.6 Mpa
Water output	45-95°C
Tilt angle	25°-50°
Hail resistance	25mm

Working principle:

1. when the discrepant temperature of the solar collector and water tank reaches the set value, the controller shall start the circulation pump automatically.

2. if the discrepant temperature of the collector and water tank does not reach the set value, the circulation pump shall be shut automatically.

3. the circulation pump makes the heat-conducting liquid circulate automatically.

4. the heat-condicong liquid transfers heat to water by heat exchanger in the water tank.

5. in case the temperature of the water tank does not reach maximum, then start the auxiliary heating device.

Features:

1. pipelines is made of all red copper and conducted by heat transfer medium liquid.

2. water does not flow in the vacumm tubes, and even if one of the tube is broken, the water in the water tank would not leak out, the solar water heater can be used as usual.

3. separated design made the installation unlimited. Heat collector is separated from water tank, so it can be installed flexibly without limit. The collector can be put on both tited roof and flat roof. It is combined with construction ideally.

4. tank is equipped with electric water heater device and automatic temperature controller.

5. intelligent control and automatic operation.

6. the water tank is placed indoors and it is in favor of reducing the heat loss of water tank.

7. you can have hot water in 24 hours every day .

warranty:

3 years international responsibility for integrated system and 15 years for vacuum tubes due to original quality problems.