split solar energy heater system
1.CE,ISO9001,ISO14001 and CCC approved ;
2.factory ;
3.small and OEM order accept
Port: Shanghai
Minimum Order Quantity: 1 Set/Sets
Supply Ability: 2800 Set/Sets per Month
Payment Terms: L/C,T/T
Contact Supplier
Packaging Detail: cartons;pallet
Delivery Detail: within 12 working days
split solar energy heater system
These systems pump heat-transfer fluids (usually a glycol-water antifreeze mixture) through the solar water heater. Heat exchangers transfer the heat from the fluid to the water that is stored in tanks. Double-walled heat exchangers or twin coil solar tanks prevent contamination of household water. Some standards require double walls when the heat-transfer fluid is anything other than household water. Closed-loop glycol systems are popular in areas subject to extended subzero temperatures because they offer good freeze protection. However, glycol antifreeze systems are more expensive to purchase and install and the glycol must be checked each year and changed every few years, depending on glycol quality and system temperatures.
Advantage:
1.Simple Installation,No Maintenance,Effective operation
2.Easy Retrofitting To Existing systems
3.Suitable for single and multiple solar heating Application systems,
4.Preferred option for extremely cold areas and questionable water quality.
I5.ncoming potable water is routed to the solar storage tank
6.Porcelain Enemal or SUS316 Stainless Stee Storage Tank With Electrical or gas Back Up
7.Double-walled Copper Coil heat exchangers in storage tank prevent contamination of household water.
Systems Specifications: >>>
| Absorber Type | Flat plate and tube |
| Absorber fin material | Copper |
| Absorber fin dimensions | 1,970mm* 970mm |
| Sputtered surface | TINOX high selectivity coationg, made in Germany |
| Absorptivity | α=0.95(±0.05) |
| Emittance | ε=0.04(±0.02) |
| Tube Array Riser to heat layer joint | Supersonic melting solder |
| Header to riser joint | Copper silver solder |
| Header material Header size | Type C-copper tube, to AS 1432-1973 Φ 25mm OD, 0.71mm wall thickness |
| Riser material Riser size Number of risers | Type C-copper tube, to AS 1432-1973 Φ 25mm OD, 0.40mm wall thickness 7 set |
| Collector socket material Collector socket thread size Maximum torque Connection pip size | Free machining brass 20mm(3/4 BSP) 0.03 kN-m 19.1mm OD ( 3/4) |
| Weights & Measures Weight empty Weight full Structural pressure test | 38kg 40kg 800kPa |
| Qty. per 20'/40' Container | 115/320 |
Model No.: SHLB--58*1800*36tubes
Features: electric solar hot water heater
1) CE ISO 9001:2000 ISO 9001:2008 CCC
2) OEM
3) Reasonal priceelectric
Model No.: heat pipe solar water heaters
Features: Stainless Steel Series Heat pipe Solar Water Heater
1)OEM is available
2)Reasonable price
3)CE ISO 9001:2000 ISO 9001:2008
Model No.: DH021RT
Features: PE-RT floor radiant heating pipe S5
1.S value: S 6.3,S5,S4,S3.2,S2.5
2.material :PE-RT
3.max temperture:95 degree Celsius
Model No.:
Features: compact solar water heater
1) OEM
2) High quality with reasonable price
3) CCC, CE, ISO 9001:2000, ISO 9001:2008
Model No.: BSSB-150L
Features: Evacuated tube: 58*1800mm stainless steel solar water solar water heater, solar boilers, with certifications: ISO9001, CE
Model No.:
Features: solar water heater system: we offer products with good quality and after-sales service
Model No.:
Features: solar water heater system: we offer products with good quality and after-sales service
Model No.:
Features: solar water system: supply good quality and after-sales service
Model No.: SS-M2-30
Features: vacuum tube solar water heater
1. EN12975 & solar key mark
2. Anti-freezen & pressurized
3.15 Year Warranty
Model No.: SP-N02
Features: Non-pressured solar powered water heater
vacuum tube solar water heater
Model No.: SP-N02
Features: DIY solar water heater system
vacuum tube solar water heater
Model No.: SP-SP01
Features: Separated solar water heater:
Spli Pressurized Vacuum tube solar water heater