split pressurized solar water heater - HK3

Split pressurized solar water heater

The split solar water heater has solar collector on roof and water tank inside the house,and transfer heat energy collected by the collectors into the tank by natural or forced circulation of the working fluid between collector and th tank.

Specification

1. Capacity : 100L,150L,200L,250L,300l
2. Working temperature :99 celsius degree
3. Stragnation temperature (°C): 300
4. Hail Resisitance : 20-30mm
5. Heat preservation:72h

Features

1. CE,ISO9001,EN-12975 certification
2. Consist of solar collector ,water tank/boiler,circulation pump,expansion evessel, controller, flowing meter, pressure gauge
3. Material : Inner tank :SUS 304-2B food grade stainless steel with 2mm thichness

Outer tank : Galvanized steel alloy sheet with 0.6mm thickness

4.The tank can be located anywhere,the solar collector can be mounted on buildings in different way

5. Special high quality insulation metarial to reducing the heat loss rate

6. Anti-freezing,more suitable in cold areas,fast start up on cloudy or rainy weather.

7. High quality heat pipe for efficient heat transferring and long life span of the solar water heater

Solar water collector

1.Mainfold :Aluminum aolly 1.5mm

2.Vaccum tube : D58*L1800 mm, D47*L1500 mm

3.Work station:SP 106

Pressure :6 bar

Electrical heater :1.5-3 kw,220/110v, 50HZ

Work principle

1.when the temperature of the heat collector reaches the set value,

the controller shall start the circulation pump automatically

2.The circulation pump makes heat-conducting liquid circulate automatically

3.The heat-conducting liquid transfers heat to water by the heat exchanger in the water tank

4. In case the temperature of the circulation pump does not reach the set value.The circulation pump shall be shut automatically