split pressurized solar water heater

split pressurized solar water heater

Working principle:

The collector absorbs solar energy and transmits it to the water tank through circulation.When the temperature of the collector reaches the set value, the controller starts the circulation pump automatically.The circulation pump makes heat-conducting liquid circulate automatically.

Then the heat-conducting liquid transfers heat to water by heat exchanger in the tank to heat the water.

The characteristic

1.The upright tank can make the water temperature to different level. It can hot the top water instantly. The special structure can reduce the cold and hot water to mix together.

2.The tank inside the building, the connection pipe between the tank

and water tap is very short, so that hot water can be used instantly and seldom cold water flows out

3.The tank inside the building, the hot water loses less energy than the normal one.

4.The heater collector and the water tank is separated, that makes the

system combine with the building perfectly, which will reduce the sightseeing for the building and environment around.

5.Back up with electric heater so that in the day without sunshine

hot water can also be used.

6.Can be combined with gas or electric heater trough the copper coil.

7. Max. Pressure: 12bar Operating Pressure: 6 bar

Specification

1. Inner tank: SUS304 2B food grade stainless steel

2. Outer tank: white color steel or Stainless steel

3. Insulation: Polyurethane 45mm, 50mm

4.Copper coil:15m each, diameter 12mm,thickness 1mm.

5.Heatpipe: Ati-freeze:-35

6.Capacity:100L,150L,200L,250L,300L,400L,500L

100L,150L,200L,250L,300L,400L,500L