Temperature and pressure safety valve:
1.automatically cooling and pressure relief;
2.according to American National Standard;
Price Terms:FOB,CIF,EXW
Payment Terms: T/T,Western Union,MoneyGram,L/C
Minimum Order: Negotiatable
Delivery Port: Customized
Contact SupplierPackaging Detail: Cartons
Delivery Detail: 7-10days
I. Feature:
II.Basic parameters:
1.Set pressure: 0.5,0.6,0.7,0.8,0.9,1.0,1.2,1.4 MPa;
2. Set pressure deviation: ± 3% set pressure;
3. Setting temperature: 99 °C -4 °C;
III.Installation:
1.the valve should be installed with top or side of the heater, the temperature sensing element from the top of the tank must be soaked in 152mm (6 ") water ;
2, safety valve discharge pipe must be installed on the bottom, the end-to-floor drain distance must be install more than 152mm (6 "), which used to clearly observed the excretion of water clearly observed.
IV. Maintenance:
After installation, the user must be tilting the safety valve handle at least each year, to ensure the the water flow smoothly through the safety valve.
before operating the safty valve handle, please check the discharge pipe connecting from safety valve to ensure that hot water can be discharged to the right place. If there is no water out, indicating the safety valve is invalid, immediately turn off the water heater, and asked staff to repaire it.
V.work conditions:
Maximum working pressure: 1.5MPa
Maximum working temperature: 121 °C
VI. real images: