solar collector - SN11

Solar collector heater Working principle:
1) When the temperature of the separate pressure solar water heater collector reaches the set value, the controller will make shall the circulation pump work automatically.
2) The circulation pump makes heat-conducting liquid circulate automatically.
3) The heat-conducting liquid transfers heat to water by the heat exchanger in the tank.
4) In case the temperature of the circulation pump does not reach the set value, the circulation pump will be shut automatically.
5) In case the temperature of the tank does not reach TM ax, then start the auxiliary heating device.

Split solar water heater Feature:
Split solar water heater Collector separates with storage tank. The tank can be put in any place of house. And the collector can be put on the inclined roof or flat place.
Module design, arbitrary combination, harmony with the building perfectly;
Intelligent control and automatic operation;
Anti-freeze: No water inside the tubes when it works.
The Split solar water heater system controller has the anti-freezing function is that the temperature circulation will operate while it reaches the fixed temperature.
Multifunction: Bathing, washing, domestic heating etc;
Work at anytime and enjoyable.

Solar water heater Structure:
The split solar water heater is composed by Split solar water heater heat collector, storage tank, controller, working station and installation parts.

Solar water heater Working principle:
1) When the temperature of the heat collector reaches the set value, the controller will make shall the circulation pump work automatically.
2) The circulation pump makes heat-conducting liquid circulate automatically.
3) The heat-conducting liquid transfers heat to water by the heat exchanger in the tank.
4) In case the temperature of the circulation pump does not reach the set value, the circulation pump will be shut automatically.
5) In case the temperature of the tank does not reach TM ax, then start the auxiliary heating device.

Solar Water Heater Specifications:
1) water tank (inner): Porcelian enamel
2) water tank (exterior): Porcelain steel
3) Glass sizes:
A) Diameter: 47mm
B) Length: 0.85m
C) Quantity: 24 / 40 / 48
4) Capacity: 100 / 150 / 200L
5) Heat preservation: 72hrs
6) Hail resistance: 25mm