Type:RW-03A
Speed:25pcs/minu.
Mains: 110V/220V/240V,50-60Hz
Power:350W(heat),2W(static state)
Electroshock proof:grade1
Minimum Order Quantity: 20 Box/Boxes
Supply Ability: 10000 Box/Boxes per Quarter
Payment Terms: L/C,T/T
Contact Supplier
Type:RW-03A
Speed:25pcs/minu.
Mains: 110V/220V/240V,50-60Hz
Power:350W(heat),2W(static state)
Electroshock proof:grade1
Net weight:7.5kg
Tank capacity:1.6litre
Wet towel width:120mm(double)
Wet towel length:180mm~230mm
Volume:420mm*210mm*310mm
RW-03A is the earliest developed wet towel dispenser of our company,and designed according to domestic customer’s habit.With particular structure,being a combination of perfection and esquisite and having achieved several national patents,this model is a new choice of pioneers.
It is widely used in restaurants,hotels,offices,public places and so on.
Using steps:
1. Turn on the power switch,This should be "normal" control panel display bright lights.
2. According to confirm button can be made 1 wet towel. Click "1" is a digit, each time you press the add 1.
3. According to "10" button is ten digits, each time you press the add 10. most Settings of 50 piece.
4. In the screen can be made according to the number of wet towel, and then click "confirmation" button. Stop making such midway fabric, can press "cancel" button
5. According to the regulator can change the humidity of wet towel humidity. "0", and "9" minimum humidity, need adjustment according to the maximum moisture humidity. According to need humidity can turn knob.
6."Water", should add sound-light alarm. "But cloth" soft towel sound-light alarm should be uniform.
7. If need hot towel, can open "soft" heating heating switches indicator.
8. Adjust the length adjustment screws, can change, "the length of the wet towel.
Safety precautions:
Simple fault and remove:
Appearance of fault | Happen reason | Remove way |
Lack of water and alarm indicator | Lack of water | Infuse the clean water |
Lack of towel, and alarm indicator | Lack of towel | Load the soft wet roll |
Without any display control panel | Unplug loose, fuse, the power switch | Tight plug, replacing the fuse, turn on the power switch |
Wet too dry or too wet | Dabble too big or too small | Adjust wet button |
Don’t out wet towel | Clip wet towel | Open top cover, throw a wrench, let blade cloth card or sword plate, pull out soft towel, cut off part, will not go back into the soft towel, shut off the power off five seconds to boot. |
technical parameters: