separate pressurized solar water heater - JNCY

separate pressurized solar water heater

Use copper tube as its flow material, conducted by thermal conductivity medium and vacuum tube does not take water, operating under the pressure. Use high-strength galvanized steel for outside shell with mold-sprayed treatment. There equipped with standard electric heating devices and automatic temperature control device for the insulation tube, as well as magnesium anode rode, which effectively prevent encrustation and keep good insulation effective.

Key Features
1. Collector separates with the storage water tank, which can be installed anywhere of the house.
2. The collector can be put on the inclined roof / flat roof/flat place.
3. Anti-freeze, no water inside the tubes when it works.
4. Intelligent controller. The system is equipped with the automatic procedure and electric heating system to supplement heat.
5. Workable at anytime.
6. Wide application, the whole heat collecting project can meet not only hot water requirement but also can be used for many other industry, warming, swiming heater fields.

Detailed Product Description:
1) The pipeline is made of red copper and conducted by heat transfer medium liquid; water

can't flow in the vacuum tubes and is operated when confined; the crust uses aluminum alloy mould material of high strength with airflow design
2) Temperature preservation is equipped with standard electric water heater setting, automatic temperature control exchanger, and increased anode magnesium bars sticking to prevent furvent furring
3) The insulating layer uses polyurethane bulk bubble and has a good effect of temperature preservation
4) The product successfully carries out the instthe instthe instahe installation of separation according to fabricating yard and is harmoniously blended with architecture
5) The equipments of separated solar water heater is composed by heat collector, storage tank, electric control device, hot water mix unit and fittings for circulation and installation

Specifications:
1) Water tank (interior): porcelain enamel
2) manifold : aluminum alloy
3) Glass tube: heat pipe

4) solar working station
5) Steel tube dimensions: 58mm x 1.8m

6) Water capacity: 150L, 200L, 300L,500L
7) Pressure: 6 bar