pressure gas regulator - S200

Technical information:

Inlet Connection: Jumbo 35mm (EN 12864 G56)

Outlet Connection: Hose Nozzle 8mm (EN 12864 H50)

Hose Nozzle 10mm (EN 12864 H51)

Type of Gas: BUTANE/PROPANE

Nominal Outlet Pressure: 30 mbar

Capacity: 1.5 kg/h

Product Description:

The PEAKGAS Jumbo Regulator in connection with the SRG cylinder valve reduces the high gas pressure in the cylinder to the low service pressure. The double stage design ensures an excellent regulator performance and characteristic. The regulator can be equipped with a pressure relief valve in the low pressure stage, opening at a nominal pressure of 150 mbar.

The body and cover of this regulator form a sealed unit after assembly in order to prevent any external interference which may affect the regulating mechanism.

The regulator can be equipped with a flow limiter which cuts off the gas flow automatically at approx 1500 l air/hr. (under normal cylinder pressure) in case of ruptured gas tubing or the gas tubing is pulled off. After cut-off the gas escape is limited to maximum 35 l air/hr.

No tools are required to connect the regulator to the valve.

Materials and Standards:

The PEAKGAS Jumbo Regulator is made of a zinc die casting (body and cover) and other corrosion resistant and LPG-proof materials such as brass, stainless steel and acetal resin.

The rubber materials used are developed and produced according to the requirements of EN 549 as well as in accordance with PEAKGAS’s own stringent specifications.

Quality standards:

PEAKGAS’s quality-control system carries an ISO 9001 certificate and is continually assessed by the Notified Body.

Capacity: Rated for inlet pressure of between 0,3 and 16 bar the regulator has a capacity of 1,5 kg gas/hr.

Packaging: The PEAKGAS Jumbo Regulator comes packed separately in a folding box. The folding boxes are packed in cardboard boxes.