low angle non-pressure solar water heater JDXL-03

low angle non-pressure solar water heater - JDXL-03

1)OEM, 2)ce&srcc, 3)20 years warranty, 4)easy installation, adjustable bracket, 5)Best price with high quality - more info check here: http://www.sourcingappliances.com/low-angle-non-pressure-solar-water-heater-30158194/

Quick Brief

Type: Evacuated Tube Pressure: Unpressurized Circulation Type: Direct / Open Loop (Active) Heating System: Thermosyphon (Passive) Connection Type: Direct-Plug Installation: low angle frame is suitable for l... Housing Material: painted steel or stainless st... Certification: CE, SRCC Place of Origin: Zhejiang China (Mainland) Brand Name: meida Model Number: JDXL-03

Specifications and Product Details:

Short Description This type is non-pressurized solar water heater. this type must be installed on the roof and higher than the using place, then will get the pressure of hot water. there is no heat pipe in the vacuum tube but heat water directly. so this type is simple system and low cost. ( it is pop in Southeast Asia and middle east and central America)

item	Diameter of water tank(mm)	Solar Vacuum Tube(GB)		Capacity (liters)	Aperture Area ( m2 )	Loading Quantity (sets)			Insulating layer(mm)
item	Diameter of water tank(mm)	qty (pcs)	size (mm)	Capacity (liters)	Aperture Area ( m2 )	20GP	40GP	40HQ	Insulating layer(mm)
JDXL-03-12	460	10	Φ58 X 1800	100	1.45	62	126	150	45/50 or more
JDXL-03-15	460	12	Φ58 X 1800	120	1.74	53	108	129	45/50 or more
JDXL-03-18	460	15	Φ58 X 1800	150	2.18	45	92	110	45/50 or more
JDXL-03-21	460	18	Φ58 X 1800	180	2.61	39	80	96	45/50 or more
JDXL-03-24	460	20	Φ58 X 1800	200	2.9	35	71	85	45/50 or more
JDXL-03-30	460	25	Φ58 X 1800	250	3.48	29	59	70	45/50 or more
JDXL-03-36	460	30	Φ58 X 1800	300	4.35	24	49	59	45/50 or more

Specifications

1, Evacuated tube: three-target, ALN/ALN-SS/CU coating

2, Inside the water tank: 0.5mm SUS 304-2B stainless steel food grade

Uses fully-automatic seamless pulsed argon arc butt welding

3, Outside the water tank: painted steel(conventional) or SUS 304-2B(food-level stainless steel)

4, Frame: painted steel or Aluminum Alloy or Stainless steel

5, Frame gradient According to local latitude

6, Insulating layer: 50 or 45mm imported Insulating layer

7, Lowest temperature resistance: -30°

8, Color as Customer request

9, OEM is available

Spare parts for the integrated system

assistant tank-automatic water supply device, can control the water flow into the solar water heater.

Working principle

The non-pressurized system is based on the natural circulation-thermosiphon phenomenon. It's the most cost-effectiveness and environmentally friendly way to harness solar energy for hot water applications, which is unsurpassed by any other solar thermal products, for its most high efficiency, low cost, easy installation.

Advantage

1,The inner tank uses fully-automatic seamless pulsed argon arc butt welding, which can prolong the life and resist corrosion; Anticorrosion inner tank, low maintenance cost.

2,Superior heat preservation ensured by one-off molding polyurethane foam The density of the polyurethane is more than 40kg/m3 to make the thermal insulation time reach to 72 hours;

3,The vacuum tube, frame and water tank are all produced by MEIDA, so quality is very Stable and delivery is on time;

4,P&AL film is attached around the inner tank to obstruct the thermal radiation and reduce the heat lose from water tank;

5,Collector efficiency remains high even in cloudy conditions;

6,Can operate without any electricity;

7,Simple structure, Easy to install(plug in), maintenance free. High efficiency and long time performance.

8, Completely automatic operation with intelligent controller.

ps.

1.The solar tube of this model is All-glass vacuum tube with heat pipe.

2. According to different demands of various users,we can design products elaborately for you., so if you ask for special size, please let us know.

3. We could also provide the the controller, electric element for favorable price.