shutter condenser,louver condenser,,refrigeration parts
Port: shanghai/ningbo
Minimum Order Quantity: 1 Piece/Pieces
Payment Terms: L/C,T/T
Contact SupplierPackaging Detail: in seaworthy cartons,wooden case,pallet
Delivery Detail: according to your order quantity
Louver condenser ,shutter condenser, refrigeration condenser,blind condenser,window blind condenser,refrigerator condenser
Specifications:
1) Raw material:
a) Rolling welded steel tube: 4.76 ~ 6.35 x 0.71
b) Low carbon steel wire: 1.4 ~ 1.6mm
c) Bracket: steel plate SPCC thickness 0.6~2.0
d) Base mounting plate: SPCC thickness 0.6~2.0
2) Technical standards: can produce according to clients' drawing or samples
3) Performance:
a) Surface with electrophoresis coating to prevent the corrosion
b) Inner cleanness can meet the requirement of R134a and CFC cooling system
c) Can satisfy the cooling capability requirements
Structure:
Wrapped type of tube embed on plate
R134a cooling system tube inside standard:
1) Residual moisture: ≤20mg/m²
2) Residual dusty: ≤30mg/m²
3) Residual mineral oil: ≤7mg/m²
4) Residual chlorine: ≤3mg/m²
5) Sealing density: ≥1.65MPa
Specification of E-coating:
1) Coating thickness:
a) Thickness of anodic electrophoresis coating: ≥12μm
b) Thickness of cathodic electrophoresis coating: ≥20μm
2) Hardness of coating: ≥2H
3) Impact of coating: 50cm.kg/cm impact, no crack
4) Adhesion of coating: ≥2 grades
5) Flexibility of coating: around R=3D bend 180 degrees, no crack or no fall off
6) Corrosion resistant (salt spray GB2423)
a) Anodic electrophoresis coating: ≥24hrs
b) Cathodic electrophoresis coating: ≥96hrs
We can supply the items according to customers' drawings or samples.
If you are interested in our products, please contract to me freely at any time.
ellaliu