1-3 tonage design for widely use
all in one style easy to install
360degree waters circulation
microcomputer auto control
CE
Port: jiuzhou/shekou
Minimum Order Quantity: 1 Set/Sets
Supply Ability: 100 Set/Sets per Month
Payment Terms: T/T
Contact SupplierPackaging Detail: carton
Delivery Detail: 20-25days after receiving prepayment
AGT the fourth generation water circulation heat pump water heater adopt panasonic compressor form japan ,lugong electronic expansive valve and four-way valve,LG connector,high efficiency heat exchanger,and low noise famous pump.
Eight features
Feature 1. special design for beauty salon,small hotel,lavipeditum,small sauna
1-3 tonnage design, low cost ,low investigation , low working charge , high stability ,long life , small occupation area ,convenient for install and maintain .
Feature 2. Design in all in one module, simple for install
No matter you know the engineering design and install or not ,three steps to finish :connect water inlet ,connect water outlet ,connect power, dispense with modify,
Feature 3. Safety and durable for water circulation style design.
Water circulation style design , it broken the instability , higher failure rate of fluorine circulation copper pipe heating security system in traditional .
Feature 4. High efficiency of the heat exchange ,low trouble rate ,long service time ,less charge for after-sale and maintains .
AGT water circulation heat pump all in one commercial style heat transfer structure adopts 360°heat cycling principle ,to draw water from tank by the high pressure water pump ,and then water cycle to tank through the heating of mainframe heat exchanger ,repeat heating in turn .
Feature 5. Humanity and manual intelligent control system will promote electric saving rate to perfect the using life of commercial heat pump about 8-12 years .
Feature 6. Special structure for two liners ,instant supplying stopping to mix the warm and cold water .
Feature 7. Reverse heat exchange design ,higher and steadier for water out.
The unit adopts our patent technology to produce 60°hot water ,under not add auxiliary facilities circumstance ,steady performance and highly cop value .
Feature 8. Heat supply interface of outer circulation pipe. (It is not including the delivery parts .This function must be match).
Technical parameters
Model | WT-(G)3P | WT-(G) 5P | WT-(G) 10P | |
Heating capacity | kW | 10.5 | 19 | 38 |
Wlecttric supply | 220V/380V/50Hz | 380V/50Hz | 380V/50Hz | |
Rated input power | kW | 2.763 | 4.6 | 9.3 |
Rated input current | A | 12.5/5.2 | 9 | 18 |
Maximum power input | kW | 3.6 | 5.9 | 11.8 |
Maximum current input | A | 16.3/7.6 | 11.5 | 23 |
Refrigerant refrigerang volume and type | G | R22/1800 | R22/2200 | R22/2200×2 |
Rated water out temperature | °C | 55 | 55 | 55 |
Maximum water out temperature | °C | 60 | 60 | 60 |
Rated water produce capacity | L | 210 | 380 | 750 |
Maximum exhaust pressure | MPa | ≤2.8 | ≤2.8 | ≤2.8 |
hydraulic pressure range | MPa | 0.3~0.6 | 0.3~0.6 | 0.3~0.6 |
Anti-electric grade | 1 | 1 | 1 | |
Water-proof grade | 1P×4 | 1P×4 | 1P×4 | |
Size | Mm | 710×710×780 | 810×810×860 | 1500×750×1080 |
Unit weight | Kg | 105 | 140 | 270 |
Noise level | dB(A) | ≤53 | ≤58 | ≤59 |
Water pipe | mm | D N25 | D N25 | D N32 |