solar water heater
1)the original equipment;
2)non-pressurized;
3)ISO9001,3C,CE,CNAL;
4)homemade
Port: shanghai
Minimum Order Quantity: 1 Set/Sets
Supply Ability: 100 Set/Sets per Day
Payment Terms: T/T
Contact SupplierPackaging Detail: export cartons
Delivery Detail: 15 days after receive the payment
solar hot water energy
Working Principle:
1, Vacuum tube absorb solar energy, heating the water inside of vacuum tube
2, According to density difference, the cold water through down into vacuum tube, and hot water flow up into solar tank
3, After circulation again and again, all of the cold water will be heated to hot water and storaged in solar tank.
Features:
1, The system is nonpressurized, drop water must rely on height difference, so the solar heater must to install higher than users
2, Exhaust vent or Exhaust pipe is most important for protection the solar heater system
Material:
Inner tank: stainless steel SUS304/2B, 0.41mm
Outer tank: galvanized/ co lour steel, 0.31mm
Frame: galvanized steel/stainless steel SUS304/aluminum alloy, 1.5mm
Insulation: polyurethane frothing, 50mm
Vacuum tube: AL/N coating, 47*1500/58*1800mm
Accessories: MG rod, electrical heating, assistant tank
Logo: OEM, co lour printing /sticker
Accessories: Optional
A), Assistant tank:
Assistant tank have a float valve, when you put water into solar tank at first time, if the solar tank is full, the assistant tank will controll to stop into water.
When the water in tank have been used or evaporated, the float valve will drop down, and cold water will into assistant tank again
B), Magnesium rod: Soften water, protection solar tank
C), Electric heater: Assistant heating by electricity when the water could not satisfy your demand.
D), Controller:
Controller can showed water level and water temperature, also can setting time for put into water and assistant heating
Usefull life: 5 years
Working Principle
Solar vacuum tube was evacuated into the tank; the coating inside of tube can absorb more than 92% heat energy from sunshine. The cold water in water tank flows into the tube and become hot, because of different density between cold and hot water, there will be a natural circulation in the tube, and hot water will float back to tank. 50 mm thickness heat insulation layer by polyurethane between inner tank and outer tank can keep the temperature of hot water for about 2 days without any sunshine, consumer can enjoy comfortable bathe anytime.
model | Vacuum tube(m2) Caliber*length | capacity(L) | Daylight area(m2) | Bath number |
XS-PT-92L-15 | Φ47*1500 | 92 | 1.41 | 2-3 |
XS-PT-110L-18 | Φ47*1500 | 110 | 1.69 | 3-4 |
XS-PT-123L-20 | Φ47*1500 | 123 | 1.80 | 4-5 |
XS-PT-147L-24 | Φ47*1500 | 147 | 2.25 | 5-6 |
XS-PT-196L-32 | Φ47*1500 | 196 | 3.10 | 7-8 |
XS-PT-145L-15 | Φ58*1800 | 145 | 2.12 | 3-5 |
XS-PT-170L-18 | Φ58*1800 | 170 | 2.53 | 4-7 |
XS-PT-200L-20 | Φ58*1800 | 200 | 3.40 | 5-8 |
XS-PT-230L-24 | Φ58*1800 | 230 | 3.91 | 6-9 |
XS-PT-145L-12 | Φ70*2000 | 145 | 2.12 | 3-6 |
XS-PT-180L-15 | Φ70*2000 | 180 | 2.67 | 4-8 |
XS-PT-210L-18 | Φ70*2000 | 210 | 3.21 | 5-9 |
XS-PT-245L-21 | Φ70*2000 | 245 | 3.75 | 6-10 |
XS-PT-280L-24 | Φ70*2000 | 280 | 4.30 | 7-11 |