heat exchange solar hot water heater - MXE-M470

solar water heater

Working Principle:

There are one inlet and one outlet, which connect with the copper coil,Copper coil is used as heat exchanger inside the water tank, Tap water connect with inlet, outlet is for hot water. When the cold water inside water tank is heated by solar vacuum tube under sunshine, It become hot water. When we need hot water to bath or wash something, Tap water via the copper coil(heat exhcanger), And become hot water, which is just we need to bath or wash something.

specification pre-heated solar hot water heater

1.Outer tank: colourful steel(galvanized steel) or stainless steel 3042B(BA),outer diameter:470mm
2.Inner tank: stainless steel SUS304 2B,thickness:0.5mm. inner diameter: 360mm
3.Copper Coil Heat Exchager:φ12*1mm
4.Vacuum tube: High-efficient vacuum tube (58mm 1800mm) .Hail resistance: 25mm
5.Insulation: 55mm polyurethane
6.Frame: galvanized steel or stainless steel. Angle:20-80 degreeGlass tube dimensions: 58 x 1.8 and 47mm x 1.5m

7.Heat preservation: 72 hours

8.Maximum pressure: 10 bars

9.Working pressure: 6 bars

10.Certificates: ISO 9001, CE or CCC

Features of heat exchange solar hot water heater:

1. This system consists of solar vacuum tube, water tank, assistant tank, copper coil, stand.

2. The syatem is connected directly with tap water, hydraulic pressure can be 0.6 Mpa(6 bar).

3. Assistant tank is on water tank, they are connected by pipe,There is ball cock in inside assistant tank,assistant tank connect with tap water, when water tank is full, The ball cock can stop load water inside water tank, This system work automatically.

4. Well wind, hail and snow resistance.

5. 72 hours heat preservation.