Water to water heat pump
Compressor with R410a
Super heater for sanitary hot water
Intelligent controll,quick microprocess
Price Terms:FOB,CIF,EXW
Payment Terms: T/T,Western Union,MoneyGram,L/C
Minimum Order: Negotiatable
Delivery Port: Customized
Contact Supplier
Packaging Detail: carton/wooden case
Delivery Detail: 25 working days
Macon ground source heat pump
This type is ground source heat pump of water to water heat pump absorb energy from underground/air source and then transfer it into warm water and air cooling/warming by 3 systems(ground/hot water/air conditioning source) inside .So the house could be warmed up by pumping the warm water to underfloor heating pipe system or radiators.It also can connect to the tank and work with any kind of indoor unit such water type fan coil, radiator, or floor heating pipe, by provide warm or hot water. One unit of monobloc heat pump can also work with several indoor units if necessary.
The core philosophy of this kind heat pump is to solve the house heating during the cold climate in Winter and Spring and make room cooling in hot Summer and Autumn.
Standard unit composition:
1)Base frame and external panels made of galvanized powder coated steel.
2)Extremely compact compressor with R410a refrigerant
3)High efficiency compressor with R410a refrigerant.
4)Reverse cycle valve
5)Water pump inside(Wilo)
6)Intelligent controller and adjustment by quickmind microprocessor with possibility of remote control.
7)Water flow switch equipped for water flow protection
8)Careful protection functions such as: high pressure, low pressure, and over-heating, overload anti-freezing, phase order, discharge temp .etc.
9)Water side equipped with AISI 316 steel plate exchanger
10)Thermostatic expansion valve
11)General testing and operational test carried out for every unit before package in the factory.
Model No.: Tymz-800D
Features: 1.Constant temperature water
2.Circle automatically
3.Turn on automatically
4.High and low voltage protection
Model No.: KS-10J1PA
Features: Air source heat pump for cooling .heating and water heating
1. -25DC run well
2. R407C,high COP
3. EVI system
4. Five modes
Model No.: WT-(G)3P
Features: AGT commercial use heat pump water heater
energy save
360 degree cycling heat exchange
Size :710*710*780mm
CE certification
Model No.: PWH052E
Features: Air To Water Heat Pump
1.Apply lowest temperature -20 degree
2.80% energy saving,green source(R417A)
3.Good anticorrosive,CE
Model No.: MKSP
Features: Pool heater/chiller;
SANYO compressor & R410A;
Mechnical ON/OFF controller;
Low cost;
Intelligent controller type available.
Model No.: MD20D
Features: Air to Water Heat Pump
1.10 year's experiences
2.ISO, CCC and CE approval
3.High COP, EER, 75%Energy-Saving
4.High quality
Model No.: KFGRS
Features: 1.High cop and low price.
2.Good quality.
3.High efficiency .
4.Low temperature works.
5.Low noise and low pollution.
Model No.:
Features: air source heat pump
function:air conditioner function(cooling+heating)+hot water
Model No.: CAW-12
Features: Air source heat pump connect to fan coil
A/C cooling & heating;
high efficiency & energy saving;
safe operation & control;
Model No.: KYS-100RT-CX/D
Features: Air source heat pump dryer
1.Control temp and humidity
2.dry fish,fruits etc everything need dry within 80c
Model No.: RS-140Y5A/T
Features: safe and environmental protected
Save energy and cost by extracting heat from the air
Automatic control
Certificate CE, EMC
Model No.: AS-H170Y
Features: 1.Heat pump COP: 4.7 ~ 5.1
2.Stainless steel cabient.
3.Auto & economic operation mode.
4.Auto-restart & auto-defrosting.