floor heating pre-heated solar water heater - PHS-S300

Pre-heated solar water heater with heat exchange

Own factory support: Haining deno Solar equipment Co., Ltd.

We insist on:

SUCCESS=HONESTY+INNOVATION+PROFESSIONAL+OPPORTUNITY; BUSINESS=MASCULINITY+KINDNESS

Detail introduction as follows:

------Working Principle:

On base of non-pressurized solar water heater

1.One copper coil is installed inside the tank as the heat exchanger(this can be connect with Gas heater for floor heating)
2.When water flows into the copper coil, it absorbs the heat of the water in the tank via the copper coil
3.Therefore the water tank is just as heat storage tank

-----Components:

Main tank with heat exchange(copper coil), vacuum tube, frame, assistant tank.

Back up components: electrical heater; Mg bar, intelligent controller

1. Main tank:

--Inner tank(dia360mm): food grade Stainless steel SUS 304-2B, thickness:0.31mm/0.4mm/0.5mm...
--Outer tank(dia460mm/470mm): stainless steel.

thickness:0.31mm/0.4mm. galvanized steel outer tank also welcome.
--Insulation:Polyurethane 50mm/55mm integral foaming. Have great heat preservation-72hours.

--15-30m copper coil installed in tanks

--assistant tank: automotive automatic inlet of water for the main tank.
--Your logo on tank is welcome

2.Vacuum tube(D58*1800mm/D47*1500mm)
--AL-N-AL Tube/ three high tube
--Tube available: 20/24/30/36/40 tubes/set

3.Frame/bracket
--stainless steel with 1.2mm thickness. rather hard!!
--Angle:0--50degree

4.Choice Accessory:
--Electrical heater: heat in cloudy /rainy day

--Mg bar: clear water

--intelligent controller: auto inlet of work, auto heat by electrical heater.

5.OEM order are welcome

6. high quality export standard packing box

Choice Solar water heater; Choice safer and better life!