explosion-proof air conditioner

1)For explosion-proof wall air conditioner, both single cooling and combined heating and cooling products in T1, T2, and T3 are available, to meet different requirements of low, medium and high temperature zones worldwide.

2)Explosion-proof wall air conditioner is developed on basis of normal product of MITSUBISHI, Carrier, O GENERAL (FUJI) or GREE brands, by taking explosion-proof measures to indoor and outdoor units.

Measures to outdoor unit: by taking special technics and control, conduct explosion-proof treatment to internal control units, compressor, outdoor fan motor, protective system, heat-removal system, cooling system, etc. Besides, explosion-proof control box and sensor system are coped with intrinsic safety. The outline dimensions and installation are the same as the original ones after explosion-proof treatment.

Indoor unit: by taking special technics and control, dismantle internal electric control units and re-design to explosion-proof structure which enables seperate explosion-proof control box. Remote controller and sensor system are coped with intrinsic safety. The outline dimensions and installation are the same as the original ones after explosion-proof treatment.

3)Remote controller provides 3V intrinsic safety power through circuit boards within explosion-proof control box; without need for battery and it is fixed directly on ex-control box, which facilitates operation.

4)Normally, rated voltage is AC220V/50Hz. Other voltages are available, such as AC220V/60Hz, AC230V/50Hz, AC230V/60Hz, AC240V/50Hz, AC240V/60Hz etc. Please specify when ordering.