electric far infrared heater - GP-220

The operating principle of carbon

Carbon crystal is a kind of modified purification carbon polymer nanoparticle heat products, modified the polymer nanoparticle and then ball milling, that obtain microcrystalline particles, then adding the Far-infrared emission agent, using the special process to synthetize the heat products, under the condition of electrical initiate, through the carbon molecule room heat generated in a "Brownian motion", carbon molecules of the impact and friction between each other to produce heat, generating large amount of infrared ray, electricity and heat energy conversion rates reach above 98%. Far infrared continuously produce of thermal effect, which is absorbed during heating process and has a very good health role for increasing the circulation, enhanced immunity. The surface temperature of heating element increased quickly and transmit the heat energy to the mantle of polymer nano carbon crystal electric materials and heat insulation materials of electrothermal material, heat insulation materials reflects the heat energy to mantle of heating material, making the surface temperature increasing during a few seconds of electricity. Between heating element and heat insulation materials reach thermal equilibrium for h eat conduction with constant temperature after twenty minutes.

The advantage of Carbon crystal board

1. Quick Install: The area of the 100 just need two man to finish in one day

2.Quick heating: System can be heated as soon as switch it on, and a set temperature can reach in about 20 minutes

3. Ultimate ultra-thin:2cm

4. Very low cost: Actual use cost than traditional heating save 30%-50%

5. Ultimate comfortable: the temperature can be regulated from 5°Cto 35°C, no noise no wind and dust-free, don’t change the air humidity

6. Environment: don’t produce any benzene, formaldehyde, hazing a very good inhibitory effect for indoor harmful gases

7. Electrical safety: Breakdown voltage resistance can reach 3750V

8. Prevent overheating security: the built-in limit temperature protector and fuse, auto power off when overheating

9. Quality assurance security: product liability insurance is 20 million, pass the ISO9001, CE, ROHS authentication, service life is 50 years

Product features of carbon crystal board

1. Heat-resistant: can withstand as high as frequency 50 HZ 1500 V, lasted 1 min pressure test
2. Moisture resisting: According to the test found that surface layer has no damage under the condition of 50°C±5%, relative humidity 80%-90%
3. Good safety: The surface temperature is from 50°Cto90°C, Intelligent temperature control system, no electoral leakage
4. Small shrinkage: In 2000 hours of aging test, shrinkage rate is 2%
5. Wide range of bearing: Carbon crystal board can safety operate in under the environment 100°C~ —40°C. Carbon crystal board conduct the bend and tensile test in 40 °C environment found the there was

not breakage and keep soft and durable characteristic.

1. High toughness: Tensile force of carbon crystal board is according to the test
2. Thermal bonding sufficient: Epoxy resin can have a good heat seal with a Advanced thermal bonding process, there is no bubble, to ensure that heating element and the article current-carrying combine closely.
3. Stable performance: Product performance don’t change under the condition of 85°C, 2000hour.

Comparison with the traditional carbon crystal board

1. Traditional carbon crystal board: only one production process, which is synthesis with copper foil and epoxy resin with high temperature hot pressing, the biggest disadvantage of this production is copper foil and epoxy will separate when it is energized, result in producing electric arc, carbon crystal board can be easily electric breakdown. Especially with the passage of time, this accident often happen. Therefore, traditional carbon crystal board happen electric breakdown is only a matter of time, the accident which is caused by carbon crystal board electric breakdown always existed. Traditional crystal board thickness is carbon 0.4 0.8 mm, the raw material is insulation materials, the disadvantage is poor Insulation performance, big leak current, easy electric breakdown, fast power attenuation
2. Glambol Carbon crystal board: It overcomes the technical problem of easily electric breakdown of the traditional carbon crystal board ,and employing the patent technology which is the copper foil and epoxy resin is fully bonding with the conductive polymer. Hidden trouble which is attributed to the carbon crystal board electric breakdown is resolved from the source cure. Glambol carbon crystal board thickness is1.0—2.0mm, good insulation performance, small leakage current, no danger of electric breakdown
3. Explain :Synthetic technology using copper foil and epoxy is the core technology in Glambol carbon crystal board, is the key to solve the electric breakdown and the length of service life.

Glambol carbon crystal board work principle

The principle of carbon crystal heating is that under the condition of Alternating electric field, the carbon molecules in the carbon crystal take place Brownian movement, the heat energy produce from impact, friction between Carbon molecules and carbon molecules group of each other, Heat wave on the way of 8-14 micron far infrared ray plane uniformly fallout, effective electric conversion reach as high as 98% above.

The importance of Electric heating

Radial current inside of the material is very small that can ensure the safety of the use, at the same time can make electric loss to a minimum, greatly extend the service life of the material.

The 8-18 micron wavelength of far infrared ray was recognized as the most beneficial to human body the rays by UNESCO, is called "the light of life" in medicine, it can promote body circulation, it has a significant effect to relieve or eliminate the regulate after illness, cardiovascular disease, waist ache, arthritis, scapulohumeral periarthritis, cervical spondylosis, enterogastric disease

Glambol carbon crystal board performance index

Thermal conversion: more than 98%

degree of compression degree: >3750V

tensile strength: >20N

The highest performance temperature: >120°C
Environmental temperature: 100 °C ~ 40 °C

Oxygen levels: > 60

Insulation level: grade E
Infrared ray radiation wavelengths: 8-14 microns

Expansion coefficient: no

Service life: 100,000hour

Carbon crystal heater maintenance

1. Forbidding the operation of drilling, book nails, planing cut or other possibly damaged carbon crystal heat board in area of carbon crystal board laid
2. 2.Forbidding divided the Carbon crystal board again or removing the position of temperature controller without permission
3. 3.Forbidding covered carbon crystal board heat area with Wall or other device to avoid the danger of local overheating