drink water uv sterilizer
1.SUS304 material body
2.compositive system
3.skillfull constructure design
4.good price
Port: Shenzhen
Minimum Order Quantity: 1 Set/Sets
Supply Ability: 1000 Set/Sets per Week
Payment Terms: T/T,Western Union
Contact SupplierPackaging Detail: carton box
Delivery Detail: 7~10days
household ultraviolet water sterilizer uv water sterilizer
flow:1gallon per minute
material:SUS 304
inlet&outlet size:1/4"
dimension:198 X 38 X 61 mm
Bactericidal effect: 304S.S cylinder using food-grade stainless steel, polished inside and outside the main body to enhance the intensity of ultraviolet radiation, had running water is less than the thickness of 10mm, high-intensity quartz lamps using ultraviolet light, will enable the bactericidal effect of the best.
Safety performance: the use of a double sealed design, Rupture of the quartz sleeve in the casing surface at the ground to protect
Cost-effective: UV lamps, electronic ballasts, quartz sleeve, sealed nut using the integration of the overall structure of compact design, reducing the installation space, while reducing manufacturing costs, packaging, transport costs are greatly reduced.
Wide range of applications: four operating voltage, can be used for a wide range of working environment, a variety of water disinfection devices, integrated design is especially suitable for harsh working conditions such as vehicle disinfection on drinking fountains.
Installation Steps
1 Tightening clip into the housing ,the other side of joint connect with pipe water.
2.Fix the Stainless steel housing on mounting brackets ,and then switch on power
Maintenance Suggestion
To operate the sterilizer properly and attain its maximum efficiency that user need to do some maintenance jobs as below
1.Quartz water sleeve is to be cleaned every 3-6 months, Step is (1) Cut off power supply (2)Unscrew and remove integration of sterilization lamps, and then remove the sleeve ,at last remove the rubber protection ring and sealing ring from the sleeve (3) With alcohol to clean the surface of the water stain(4)Re-install
2..UV lamp replacement is recommended every 8000 hours of operation. Step is(1) Cut off power supply (2) Remove the integration of instantaneous sterilization lamps (3) Replacement of a new one ,(4)Re-install
3. To avoid frequent opening and shutting down, so as to extend the service life of UV lamps. purifier