copper coil separate solar water heater system - MXR-SSMP

separate solar water heater system

The seperate solar water heater system is a split pressured system, whose collectror is separated from the storage tank. It is flexible assembly, combined with building perfectly. The system consists of storage tank, solar collector and workstation.

Two heatexchanger models can be used for houses which have been already equipped with other energy sources(e.g. gas, boiler, etc.). When the weather is cloudy or rainning for a period of time, the water can be heated by upper heat exchanger sourced by other energy. All the storage tanks should be tested as tested pressured of 1.2 Mpa(12bar) and the working pressure is 0.6Mpa(6bar). The daily efficicency is over or equal to 55%.

Working principle:

Solar collector gathers energy and heat the medium material in the copper pipe, the medium transfers the heater to the water in pipeline the solar collector. When there is temperature difference(settled by customers) between the two sensors in collector and tank respectively, intelligence controller activates the circulation pump automatically, and forces the flow of heat medium in the pipeline and do heat exchange with the water inside the tank via copper coil in the storage tank. In case the temperature of the water tank does not reach T-max, then start the auxiliary heating device.

Features:

1. Use heat pipe for the heat conduction and can get a high heat absorption efficiency and rapid heat transfer.

2. The pipeline is made of red copper and conducted by heat transfer medium liquid; the crust uses aluminium alloy mould material of high strength with airflow design

3. Good anti-frozen performance, it can still work under the environment of -30

4. Match with intelligence controller and assistant electrical heater, the system can provide hot water to you anytime.

5. The insulation layer uses polyurethane bulk bubble and has a good effect of temperature preservation

Specification:(we can customize according to customers' requirement)

Inner tank: SUS304-2B food grade stainless steel/ SUS316 with thickness of 1.2-2.0mm

Outer tank: stainless steel/ galvanized steel/ white color plate

Capacity: 100-500L

Evacuated tubes: dia. 58mm*1800mm with heat pipe

Insulation layer thickness: 55mm

Bracket: aluminium alloy with thickenss of 2.0mm

Heat preservation: 72hours

Hail resistance: 25mm