compact non-pressure solar water heater - SDTJ

Thermosiphon system

Using a thermosiphon solar water heater systems is an excellent way to start saving on your domestic hot water heating bills. The tank must be above the collector, so the thermosiphon phenomenon can occur,circulation water from collector to tank.

Advantages:

1. He can operate completely automatic if connect with microcontroller.
2. Simple structure, easy plug-in installation, can be installed both on flat or inclined roof, and can be installed with an auxiliary electric heating system as to supply hot water without sunshine.
3. Superior heat preservation ensured by one-off molding polyurethane foam with thickness 55mm.
4. Suitable for household

5. Stable and reliable performance, well wind resistance.
6. Meet the mankind healthy bath standard: The material of inner tank is SUS304-2B food grade stainless steel plate; the silicon gasket sealing has a long life against the erosion and it isn’t harmful to health.

Specifications:

Tank: 100L – 300L

Inner tank: Stainless steel food grade SUS 304-2B

Thickness: 0.4mm

Outer tank: Stainless steel

Thickness: 0.31 mm

Thermal insulator: Polyurethane foam Thickness: 50mm

Operate temperature: >0°C

Work pressure: 0.5 bar (0.05 Mpa)

Frame:

Material: Galvanized sheet

Fasteners: stainless steel screws

Angle: 20, 27, 38, 45

Adapts to many angles of roofs

Thickness: 1.2 mm

Seal Material: polymer silica plastic

Tube Specifications are at the bottom

Installation Instructions:

Because of its work principle, it needs to be installed on the roof, that is to say, it needs 3 meters height fall.