Integrated Heat-pipe Solar Water Heater, twice heat exchange design with copper heat pipe, efficient and anti-freezing system
Port: SHANGHAI / NINGBO
Minimum Order Quantity: 1 Set/Sets
Supply Ability: 5000 Set/Sets per Month
Payment Terms: L/C,T/T,Western Union
Contact SupplierPackaging Detail: Inner poly bag with outer export carton packing
Delivery Detail: 15~25 days for FCL
Working Principle of Heat Pipe SWH
Heat pipe vacuum tube is adopted in this system as solar collecting device which is of the most efficient, the heat pipe tip is plugged into the copper cannula which is welded into water tank with the end closed to prevent contamination of water, no water will go through vacuum tube but be heated by heat pipe tip through cannula, so it is possible to remove the vacuum tubes and heat pipes without draining the system. At the same time the water tank itself is pressurized so that it could be connected directly with tap water, which makes your daily using of hot water much more comfortable.
Heat pipe vacuum tube is a kind of vacuum tube which adopts a copper heat pipe inside of the tri-target vacuum tube, The heat pipe is hollow with the space inside evacuated, Inside the heat pipe is a small quantity of fluid which has a very low boiling point, So when the heat pipe is heated above the boiling point in vacuum tube the fluid vaporizes, the vapor rapidly rises to the top of the heat pipe transferring heat. As the heat is lost at the condenser (absorbed sufficiently by the cold water in water tank), the vapor condenses to form a liquid and returns to the bottom of the heat pipe to once again repeat the process. In this way the cold water in storage tank gets heated enough with a twice heat exchange design.
Designed specifically by INLIGHT to perform efficiently in extremely cold climates, the integrated insulation and the heat pipe vacuum tube produces a remarkable all weather, all year round performance.