Ensure that the power switch is at ''OFF'' position.
Place the ice cubes in the jar, pour in the jar some liquid, should it be water, milk, honey, syrup, etc.
Put in some coffee, cocoa, almond powder, juice or others as you like into the jar.
Mount the jar onto the main base motor by fixing the male end underneath the jar into the female end on the platform of the base. Make sure that the four protruding rubber ends are fitted securely to the base of the jar.
Cover the jar with the silicon rubber cap & insert the mixing pole through the hole in the cap.
Pull the ''PULSE'' level upward for top speed grinding and hole for 3 to 5 seconds. Repeat this step until all ice cubes are crushed.
Turn the speed adjuster at any location to ''MIN'' position, switch the power on by switching the level upward to ''ON'' position until the crushing noise is consistent. The speed may be increased for finer particles. Stir the jar content with mixing pole if it is in consistent.
Press downward the power switch to ''OFF'' position when the satisfactory particle size is obtained.
For ice cube crush - just place the ice cubes into the jar with a little water (Procedure for using the blender please follow as above)