1) split pressure solar heater system
2) procelain enamel inner tank
3) 5 year warranty time
Price Terms:FOB,CIF,EXW
Payment Terms: T/T,Western Union,MoneyGram,L/C
Minimum Order: Negotiatable
Delivery Port: Customized
Contact SupplierPackaging Detail: export carton
Delivery Detail: 15 days
split pressure solar heater system
Model: WTO-PP Split pressurized solar water heater
Inner tank: porcelain enamel inner tank 2.5mm-3.5mm
Outer tank: colored steel sheet
Working pressure: 0.7Mpa
Test pressure: 1.2Mpa
Feature
1)the product uses super heat conduction pipe and has a good effect of heat exchanger
2)collector separates with the storage tank, The enamel tank can be put anywhere of the house
3)The pipe is made of purple copper and conducted by heat transfer medium liquid ; water can’t flow in the vacuum tubes and is operated when controlled
4)Intelligent control and automatic operation
5)The insulation layers uses the up-to-date technology and has a good effect of temperature preservation
6)The equipment of separated solar water heater is composed by heat collector
,storage tank, controller, working station and installation parts
7)multifunction : water for bathing ,washing ,cooking and so on
8)working with work station, make a full system completely automatic, you can use hot water any time, high efficient and no pollution
9)the insulation layer uses imported polyurethane and has a good effect of temperature preservation
10)collector can install anywhere ,on flat or slope roof
11)standard export packing
12)5 years warranty time for complete system
split pressure solar heater system
Model: | WTO-PPO | |
specification | Solar split system | with one heat exchanger |
1)solar tube | Φ58/1800 mm | Three target vacuum tube |
Life time: 15 years | Warranty time: 5 years | |
2)Heat Pipe | Copper material | Transmit power:180W-280W |
Life time: 15 years | Warranty time: 5 years | |
3)Inner tank | Enamel tank | Thickness: 2.5mm or 3.5mm |
4)Outer tank | Colored steel | Thickness: 0.31mm |
5)Tank volume | 150L ,200L, 250L, | 300L ,400L ,500L |
6) Insulation | Polyurethane foam | Thickness: 55mm p=38kg/m3 , K=.0035w/mk |
7)Copper coil | Diameter: 16mm | Thickness: 1.0mm |
8) Optional coil | Diameter: 22mm | Thickness: 1.0mm |
9) accessories | P/T valve,E-heater, Mg anode, Check valve ,drain valve | |
10)Work Pressure | 6 Bar (0.6Mpa) | Test Pressure: 12 bar (1.2Mpa) |
11)Inlet/Outlet | 3/4inch | Snow load: 30cm |
12)Warranty time | 5 years | Life time: 15 years |
13) Packing: | export carton |
Enamel Tank Advantage:
1.Green Product: use clean energy-solar & no poisonous metals, bring health to life;
2.Barking at 900°C:no leakage,free from corrosion & scare, 5 years' warranty time;
3.longer heat preserving time: for 100 hours, enamel tank itselt is insulated to heat;
Update Date:2010-8-10 10:49:54