WTO-PH copper coil solar water heater - WTO-PH

1) solar water heater, 2) 3 years warranty time, 3) best service & quality & price - more info check here: http://www.sourcingappliances.com/WTO-PH-copper-coil-solar-water-heater-10151021/

Quick Brief

Type: Evacuated Tube Pressure: Pressurized Circulation Type: Direct / Open Loop (Active) Heating System: Thermosyphon (Passive) Connection Type: Direct-Plug Installation: Freestanding Housing Material: Stainless Steel Certification: CE, UL Capacity: 250 Place of Origin: Jiangsu China (Mainland) Brand Name: Your brand or WTO SOLAR Model Number: WTO-PH solar type: solar water heater Copper coil inside the tank: yes Heat Pipe: none solar tube: 58/1800 mm Inner tank: Stainless steel Outer tank: Stainless steel accessories: electric heater,solar controller,m... Inlet/Outlet: 3/4inch working pressure: 0.6Mpa Warranty time: 3 years

Specifications and Product Details:

solar water heater

Model: WTO-PH copper coil solar water heater

1) Use in any time: It adopts

advanced design idea and integrates with high efficiency pre-heated patent technique, so it can warm the cold water rapidly when it flows through special pipe. It can overcome the demerit its of traditionsl SWH, such as slow heating, long waiting time.

2) More capacity: We adopt special exchanging heat mode, it avoids mixed effect, so cold water can be heated at any moment.

3) High hydraulic pressure: The hydraulic pressure is same as tap water, it is very suitable for tired person.

4) Easy operation: It can supply water automatically, you can take it easy and enjoy good time.

5) Economical and Environment protecting: There is no pollution when it is working since it depends on sunshine, Green and economical

6) Fashionable: The appearance is fashionale and it can great integrate with your fitment.

Working principle:

One copper coil is installed inside the tank as the heat exchanger. When water flows into the copper coil. It absorbs the heat of the water in the tank via the copper coil therefore the water tank is just a heat storage tank.

Working pressure:6 bar.

Specifications:

1) Inner tank material : SUS304-2B Food grade with 0.4mm thickness.

2) Outer tank material: Galvanized steel plate with 0.4mm thickness.

3) Frame material: Galvanized steel plate with 1.5mm thickness.

4) Material of heating preservation :55mm Polyurethane

5) Vacuum tube dimensions: 47mm x 1500mm / 58mm x 1800mm / 58mm x 2100mm

6) Water tank capacity: 100L-300L

7) Pressure : 0.6 Mpa

8) Heat preservation: 72 hrs

Hail resistance: 25mm

Model:	WTO-PH
specification	copper coil solar water heater
1)solar tube	Φ58/1800 mm
1)solar tube	Life time: 15 years	Warranty time: 5 years
2)Heat Pipe	none
3)Inner tank	Stainless steel	Thickness: 0.5mm
4)Outer tank	Stainless steel	colored steel
5) Insulation	Polyurethane foam	Thickness: 50mm
6)Tank volume	150L- 300L	Outer tank diameter: 470mm /500mm
7) copper coiil	diameter:12mm	14mm,16mm ,Thickness: 1mm
8) accessories	electric heater	solar controller,mg anode,auxiliary tank
9)Frame Material	Aluminium Alloy	stainless steel
10)Work Pressure	6 Bar (0.6Mpa)
11)Inlet/Outlet	3/4inch	Snow load: 30cm
12)Warranty time	3 years	Life time: 15 years
13) Packing:	export carton