It has better pressure-resistant capacity.
Port: Shanghai or Ningbo
Minimum Order Quantity: 500 Piece/Pieces
Supply Ability: 100000 Piece/Pieces per Month
Payment Terms: L/C,T/T
Contact SupplierPackaging Detail: standard exporting packing
Delivery Detail: usually within 20days
Model | Nomlnal size | Dimensions | Working pressure | Testing pressure | |||||
inch | mm | A | B | C | D | E | |||
SF-1 | 3/8 | 9.25 | 3/8 | 3/4 | 7 | 8-1/2 | 1/2 | 35kg t/cm² | 125kg t/cm² |
SF-2 | 1/2 | 12.7 | 1/2 | 7/8 | 7-1/4 | 9 | 1/2 | 35kg t/cm² | 125kg t/cm² |
SF-3 | 5/8 | 15.88 | 5/8 | 15/16 | 8 | 9-7/8 | 7/8 | 35kg t/cm² | 125kg t/cm² |
SF-4 | 3/4 | 19.05 | 3/4 | 1/4 | 8-1/16 | 10-1/2 | 7/8 | 35kg t/cm² | 125kg t/cm² |
SF-5 | 7/8 | 22.23 | 7/8 | 1-3/8 | 9-1/4 | 12 | 7/8 | 35kg t/cm² | 125kg t/cm² |
SF-6 | 1-1/8 | 28.58 | 1-1/8 | 1-3/4 | 9-7/16 | 13 | 7/8 | 35kg t/cm² | 125kg t/cm² |
SF-7 | 1-3/8 | 34.93 | 1-3/8 | 2-1/16 | 11-7/16 | 15-1/2 | 7/8 | 35kg t/cm² | 125kg t/cm² |
SF-8 | 1-5/8 | 41.28 | 1-5/8 | 2-1/4 | 12-3/8 | 16-15/16 | 1 | 35kg t/cm² | 125kg t/cm² |
SF-9 | 2-1/8 | 53.98 | 2-1/8 | 2-11/16 | 15-3/16 | 20-1/2 | 1-3/8 | 30kg t/cm² | 100kg t/cm² |
SF-10 | 2-5/8 | 66.68 | 2-5/8 | 3-1/16 | 18 | 24-1/8 | 2 | 25kg t/cm² | 80kg t/cm² |
SF-11 | 3-1/8 | 79.38 | 3-1/8 | 3-7/16 | 20 | 26-15/16 | 2 | 20kg t/cm² | 80kg t/cm² |
SF-12 | 3-5/8 | 92.08 | 3-5/8 | 4-1/16 | 24 | 32-1/8 | 2 | 15kg t/cm² | 70kg t/cm² |
SF-13 | 4-1/8 | 104.98 | 4-1/8 | 4-1/2 | 24 | 33 | 2 | 15kg t/cm² | 70kg t/cm² |
General Descriptions:
1. Shield vibration absorber is designed to be installed in the suction and discharge lines of air conditioning and refrigeration systems to reduce vibration in the transmission of compressor-induced vibration through tubing.
2. Shield vibration absorber is produced of deep pitch corrugated tube for increasing flexibility and vibration absorption, covered by high tensile wire braided for superior strength;
3. The tube and braid are reinforced by ferrules at each end, and connected with a female copper tube end by high temperature of brazed alloys;
4. Each Shield vibration absorber is tested for pressure and then carefully vacuum tested using a highly sensitive helium mass spectrometer leak detection device.
Features and benefits:
1. OEM is available;
2. Sizes are available both in metric and in inch units
3. Hoses and copper tubes are brazed.
4. A completed physical and chemical analysis for all basic components
5. Components have been checked and inspected during various phases of assembly
6. Perfect inspection for finished product.