Vertical pressurized stainless steel solar hot water tank with two copper coils - CPS-SWT-A23

Specification of pressure solar water tank

1. Inner tank: SUS 304-2B food grade stainless steel or porcelain enamel

2. Outer tank: 0.5mm color stainless steel or galvanized steel

3. Insulation: 50mm (Polyurethane)

4. Heat preservation: 72 hrs

5. Testing pressure: 0.8MPa (8bar)

6. Electric heater:3KW

7. 80L-650L capacity tanks for your option

Features of Pressure solar water tank

1. The upright tank can make the water temperature to a high level. It can heat the water instantly.
2. The tank inside the building, the hot water loses less energy than the normal one
3. The pressurized solar water heater collector and the water tank is separated, that makes the system combine with the building perfectly, which will reduce the sightseeing for the building and environment around
4. Back up with electric heater so that in the day without sunshine hot water can also be used
5. It can be combined with gas or electric heater
6. Max. Pressure: 12bar; Operating Pressure: 8 bar
7. It can be used for washing, bathing, showering, and swimming pool etc

Working principle of Pressure solar water tank

1. The collector absorbs solar energy and transmits it to the water tank through circulation
2. When the temperature of the collector reaches the set value, the controller starts the circulation pump automatically
3. The circulation pump makes heat-conducting liquid circulate automatically
4. The heat-conducting liquid transfers heat to water by lower heat exchanger in the water tank.
5. When the temperature difference between solar collector and tank doesn't reach the set value, the circulation pump will be shut automatically
6. In case the temperature of the water tank does not reach T-max, Electric Heating Element will start to work automatically