Split solar water heater (CE ISO 3C)

Split Open Loop Solar Water Heater

Introduction

Components:

Skylight Solar flat plate collector, solar storage tank and frame

SkylightTank and Frame Specifications:

1) Volume: 150L, 200L, 300L

2) Inner tank material and thickness: SUS304 2B /0.5mm

3) Outer shell material and thickness: Color steel/0.45mm

4) Insulation material and thickness: CFC free Polyurethane/55mm

5) Frame material and thickness: Galvanized steel /1.5mm

6) Size of the holes: G1/2 OR G3/4

7) Electrical heater: Available against request, 1500W or 2000W

8) Magnesium rod: Available against request

9) Assistant tank: Available against request: Dia. 160mm*220mm (6L), 8L, 10L, 30L, 50L, double tank.

10) Controller: Available against request: SP26 SR500 SR609

11) Guarantee: 5 years for galvanized steel support, 5 years for solar storage tank and Flat plate collector

Skylight Flat Plate Collector Technical Parameter

1. Skylight Dimension (L*W*H) mm: 2000*1060*70/ 2000*1060*80/ 2000*1060*90

2. Skylight Core: all copper, ultrasonic welding

3. Skylight Coating: black chrome/ Blue titanium

4. Skylight Absorber material &thickness: copper, 0.15mm

5. Skylight Header pipe material, dimension and quantity: copper T2; Φ25*0.6*1060mm; 2pcs

6. Skylight Riser pipe material, dimension and quantity: copper T2; Φ10*0.5/Φ12*0.6mm; 8pcs

7. Skylight Material & thickness of glass: tempered glass: 4mm /fabric tempered glass: 4mm/low iron fabric tempered glass: 3.2

8. Skylight Material & thickness of frame: aluminum, 0.8mm

9. Skylight Insulation of material: high pressure high density polyurethane foam

10. Skylight Insulation thickness mm: 30

11. Sky+light Material & thickness of the back sheet: embossed aluminum, 0.3mm

12. Skylight Packing: carton

13. Sky-light Packing dimension (two pieces in one carton): 2020*1100*160/ 2020*1100*180/ 2020*1100*200

14. Skylight Net weight: 32kg/33kg/35kg

15. Skylight Qty of 20' container: 165/145/130pcs

16. Skylight Qty of 40' container: 340/306/276pcs

17. Sky-light Qty of 40H' container: 390/346/306pcs

1. Glass gasket

2. Coating

3. Full copper absorber plate

4. Disposed special insulation

5. Gasket and sealant

6. Black sheet

7. Aluminum alloy batten

8. Aluminum frame

9. Tempered glass

Working principle

A. When the temperature of the heat collector reaches the set value, the Controller shall start the circulation pump automatically.

B. The circulation pump makes heat-conducting liquid circulate automatically.

C. The heat-conducting liquid transfers heat to water by heat exchanger in the water tank.

In case the temperature of the water tank does not reach T-max (Temperature Maximum Point), then start the auxiliary heating device.

Product components

1.Heat Pipe Solar Collector

Heat pipe solar collector is made up of a vacuum tube (outside), a copper heat pipe (inside) and an absorb fin which made of aluminum. Heat pipe was wraped with the 360°absorb fin. The advantage is its high efficiency of heat conduction.

2.High Pressure Water Storage tank

High pressure water tank without heat exchanger inside.

Working Station

The unit gathered the Controller, Circulate Pump, Flow meter, Relief Valve, Pressure Gauge, Expansion Vessel, Shut-off and check Valve in together.

There are two model: SLWSA (low cost and simple systems)

SLWSB (relatively high cost and easy to fix systems)

Application of Projection on this system

1. Pool Heating

If you have taken steps to retain your pools heat but are still not happy with your heating bills, or if you plan to install a new pool, a solar pool heater may be a good investment. Such heating systems are one of the most cost-effective applications of solar energy. It is relatively simple to integrate a solar water heater since most pools require a pump, filter, and plumbing. With a solar energy system, the pools water is pumped through the filter and then through a solar energy collector(s) instead of directly back to the pool. The sun heats the water in the collector(s) before it returns to the pool.

If you add a solar heater, you may need a pump larger than your present one, or a separate, smaller pump to pump the pools water to and through the solar collectors. Adding any heater, solar or otherwise, will preclude selecting the smallest pump. Nevertheless, you also may reduce pumping time to help cut costs.

2. House/Space Heating

The solar collector System is capable of contributing significantly to space heating requirements in many areas. The best use for solar energy is to heat a building by radiant under floor hydraulic heating, which requires water at a temperature of around 60°C. This system usually uses a concrete floor slab with special water pipes running through it, to provide a pleasant, even, low temperature radiant heat. The floor slab will also provide heat.