Split-pressure Solar Water Heater

Heat Pipe Split Pressurzaied Solar Water Heater

Features:

1. This system consists of solar heat pipe collector,, water tank, stand, solar working station.

2. It is very high efficiency that heat pipe transmit heat very quickly.

3. The water temperature of this system rise up very quickly.

4. Solar heat pipe collectoris very high efficiency.

5. Well wind, snow and hail resistance.

Working Principle:

The key of this system is solar heat pipe collector, which consist of solar vacuum tube, heat pipe, manifold,frame etc. Heat pipe has some medium inside, When solar vacuum tube absorb heat energy from sun, then transmit it to heat pipe , the liquid medium of the bottom of heat pipe become vapour, then rise up to the top, cooled by cold water then go down to the bottom of heat pipe,This is circulation of solar heat pipe collector. This complete system is connected by pipe(copper pipe). There are two temperature sensors in solar heat pipe collector and water tank, For example, We set the temperature difference is 10 degree, when the water temperature rise, and the temperature difference between solar heat pipe collector and water tank exceed the set value, The controller inside solar working station will start the circulation pump, the cold water will cool the solar heat pipe collector, and heat the water inside water tank by exchanger inside water tank, when the temperature difference is down under the set value, The controller will stop the circulation. It just is circulation process. Via one day working, the water temperature of water tank can arrive in 50~95 degree, Then we can use the hot water inside the water tank!

Features:
1.Collectors are separated from the storage tank, so the tank can be put anywhere around the house.

2.The collectors can be put on the inclined roof or flat place

3.Module structure, easy combination, harmony with the building perfectly
4.Intelligent control and automatic operation
5.No worry about being frozen because there is no water running inside the tubes when working
6.The system controller will start the at the set value so as to prevent the system from freezing
7.Workable at anytime and enjoyable multifunction
8.Hot water center for bathing, washing and domestic heating

Split-pressure Solar Water Heater

Materical and major element:

A)Solar collector with heat pipe:

1.Vacuum tube with copper pipe(resist high cold weather-40)

2.Vacuum tube:borosilicate glass 3.3,coating:AL/N/Al and copper pipe

3. Material of manifold:Aluminium alloy plate/0.5mm thickness

4.Manifold of bracket:Aluminium-zinc plated/1.2mm and 1.5mm thickness

B)Heat preservation water tank:

1.Inner water tank:porcelain enamel/2.0mm.

2.Outer water tank:Aluminium zinc/0.4mm thick

3.Double copper coils inside tank for heat exchange

4.Preservation:55mm high dense polyurethane foam

5.Tank diameter:600mm

C)Solar power workstation:

1.micro controller 2.Expansion vessel 3.Manumeter 4.Circulation water pump

D)Warranty:

a)ISO9001/CE

b)5years' international responsibility for free repairing or exchange due to originalproblems