solar room heater:
1.CCC, CE, ISO, SRCC, KEYMARK(en12976,en12975),CSA,SGS
2.Pressure totally
3.Balcony uss is available
Port: Shanghai or Ningbo
Minimum Order Quantity: 1 Set/Sets split pressurized solar water heater
Supply Ability: 100000 Set/Sets per Year split pressurized solar water heater
Payment Terms: L/C,T/T
Contact SupplierPackaging Detail: For Sample, Wooden Packing, For Container, Carton Box
Delivery Detail: For less than 2 container order, 2 weeks after payment
----------------solar room heater-------------------
Specification:
1. Body material: PVDF or galvanized steel
2. Water tank: SUS304-2B stainless steel
3. Coil Material: High Heat Coduct Copper coil
4. Water tank capacity: 150L, 180L, 200L, 250L, 300L, 360L
5. Pressure: 0.6Mpa
6. Heat Preservation: 72 hours
7. Hail resistance: 25mm
Solar colector features:
1. The storage tank is separated from the heat collector. The tank can be put anywhere of the house
2. the super heat conduct pipe with a purple copper inside it. Conducted by heat transfer medium liquid, the thermal transfer efficiency is higher
3. the control can
4. the system can withstand a pressure of 0.6 Mpa
5. It can work normally even if one tube is broken
6. It consists of water tank, collector, controller, work station
7. Without incrustant, its life span is as long as 15 years
8. Temperature preservation can last 72-80 hours
9. Completely automatic operation
Work principle:
1) when the temperature of the heat collector reaches the set value, the controller shall start the circulation pump automatically
2) The circulation pump makes heat-conducting liquid circulate automatically.
3) The heat-conducting liquid transfers heat to water by the heat exchanger in the water tank
4) In case the temperature of the circulation pump does not reach the set value. The circulation pump shall be shut automatically.
5) In case the temperature of water tank does not reach Tmax. Then start the auxiliary heating device.