Split Pressurized solar water heaters with double Heat Exchanger
CE CCC SRCC solarkeymark iso
OEM and special design is OK
Port: Shanghai
Minimum Order Quantity: 3 Set/Sets
Supply Ability: 5000 Set/Sets per Year
Payment Terms: L/C,T/T
Contact Supplier
Packaging Detail: carton
Delivery Detail: 15-20 days
Split Pressurized solar water heaters with double Heat Exchanger
CE CCC SRCC solarkeymark iso
OEM and special design is OK
Product description:
SKI-SC contains three main parts: Solar Collector, Working Station and Water Tank. The solar collector installed on roof or wall. The tank contains double copper coil, and it can be put anywhere as you want, so the whole system is harmonious with the building. The heat was transferred from solar collector to the tank by controller. The system not only heats the water with solar energy but can use other energy. High efficiency and cost save. And if the sunshine is not enough, the user can apply to electric heating element for back up. Even if in cloudy or rainy day, the user can enjoy hot water. It is ensured that when using heat pipes no water goes into the tube and there are no incrustation, no bursting. Moreover, water can go upward at anytime.
Working Principle:
When the temperature difference between solar collector and tank reaches the set value, the controller will start the circulation pump automatically. The circulation pump makes heat-conducting liquid circulate. The heat-conducting liquid transfers heat to water by lower heat exchanger in the water tank . When the temperature difference between solar collector and tank doesn’t reach the set value, the circulation pump will be shut automatically. In case the temperature of the water tank does not reach Tmax, Electric Heating Element will start to work automatically. The higher copper coil can connect with other energy. As shown in Fig-3.
Specifications:
Inner tank: Titanium Steel, thickness: 2mm and Enamel Coating, thickness: 0.5mm.
Outer tank: Colored Steel Sheet thickness: 0.5 mm
Tank Include: 1.5kw or 2.5kw Electric Heating Element, T&P Valve, Mg Anode, sensor, Double Copper coil.
Tank Capacity: 100L to 500 L
Working Pressure: 0.6 Mpa
Vacuum tube: Heat Pipe.
Vacuum tube model: 58mm×1800mm
Frame: Adopt galvanized steel. Thickness:1.5mm.
Accessories: Solar Work Station
Model No.: DP01
Features: 1. Make advantage of the tap water's pressure
2. Rapidly heated
3. Produce more hot water
Model No.: SLCFS
Features: 1)Compact non-pressurized flat plate solar Water heater
2) Manufacture since 1998
3) Free training, no worry
Model No.:
Features: Evacuated Tube Solar Water Heater with Stainless Steel Tank
Concentration,do OEM,ISO,CCC,CE approval
professional.
Model No.: 9
Features: solar water heater system
1. energy-saving, use solar energy only,
2. economical,
3. no-pollution.
Model No.: SLA
Features: 1. CE,SRCC,Solar Keymark
2. Non-pressurized
3. 10 years warrantee
4. 10-15 days delivery
5. OEM available...
Model No.: MXE-M470
Features: Compact Solar Water Heating
1.CE,CCC,ISO9001,ISO14001
2.15 Years'Service Life
3.3 Years'Guarantee
4.25,000Sets/Month
Model No.:
Features: Flat Plate Solar Water Heater
1.OEM available
2.Intelligent operation
3.High efficiency
4.It works even freezing -36
Model No.: SKI-PP
Features: pressurized solar heating system.
1.heat-pipe solar collector.
2.pressurized water tank 100L-300L,automatic control.
Model No.: TJHP-150
Features: OEM offered
Combined with building
Providing hot water anytime
Good anti-frozen performance,can work under -30 degree
Model No.: XK1830
Features: 1.non-pressure solar energy heater.
2.inner tank:SUS304
3.outer tank: Galvanized steel
4.FOB SHANGHAI USD110-240/SET
Model No.: ITM-07
Features: interma pressurized solar water heater
Adopting SUS316L stainless steel as its inner tank . easy to installation and operate
Model No.: XF-II
Features: stainless steel solar water heater
1.have 7 years of export
2.have factory of vacuum tube
3.pass the CE 3C ISO9001
4.OEM