The tank is available with no coil ,single coil and dual coils , which is depending on customers' requests.
Price Terms:FOB,CIF,EXW
Payment Terms: T/T,Western Union,MoneyGram,L/C
Minimum Order: Negotiatable
Delivery Port: Customized
Contact SupplierPackaging Detail: Packing with exporting foam and carton
Delivery Detail: 15~30 days according to the order
Split solar system structure:1.The split solar water heater is composed by heat pipe solar collector, stainless steel storage tank, controller, and working station and etc.
The tank can be put in any place of house and the collector should be put on the inclined roof or flat place.. The tank is available with no coil ,single coil and dual coils ,which is depending on customers' requests
Advantages:
1.It adopts the efficient SS-Cu-Al/N/Al heat absorption coating vacuum pipe heat collector, no water in vacuum tube, if one of the vacuum tube is broken, no effect to the whole system. It has high absorptivity, low emission rate. The fully stainless steel mirror reflector plate has higher reflection efficiency. It effectively enhances the thermal efficiency of the solar system scientific and reasonable.
2.The tank could be put anywhere in the house. It use the high density of the insulation and it could keep the hot water for long time
3. Multifunction: bathing, washing, domestic heating.
4.Easy to install and maintain.
Split Solar Water Heater With SUS Tank
Vol.(L) | 80L | 120L | 150L | 200L | 250L | 300L | 400L | 500L |
Inner Tank | Φ365 | Φ365 | Φ365 | Φ480 | Φ480 | Φ480 | Φ550 | Φ550 |
Outer Tank | Φ450 | Φ450 | Φ450 | Φ570 | Φ570 | Φ570 | Φ650 | Φ650 |
Tube No.(pcs) | 10 | 15 | 18 | 24 | 30 | 36 | 48 | 60 |
Insulation Layer | Polyurethane | Polyurethane | Polyurethane | Polyurethane | Polyurethane | Polyurethane | Polyurethane | Polyurethane |
Material Coating | stainless steel 304 | stainless steel 304 | stainless steel 304 | stainless steel 304 | stainless steel 304 | stainless steel 304 | stainless steel 304 | stainless steel 304 |
stainless steel 304 Thickness (mm) | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 |
Surface area heat exchanger top (m2) | — | — | 0.4 | 0.4 | 0.4 | 0.4 | 0.5 | 0.5 |
Surface area heat exchangerbottom(m2) | 0.5 | 0.5 | 0.6 | 0.7 | 0.7 | 0.7 | 0.8 | 0.8 |