Split Pressurized Solar Water Heater System - 47mm*1500mm 58mm*1800mm

Split Pressurized Solar Water HeaterSystem

Product Description
Specification:
Vacuum tube: Made of high-brosilicate glass
Inner tank materials: SUS304-2B;
Outer tank: Galvanized plate/color-coated sheet;
Thickness of insulation layer: 50-65mm imported polyurethane foam for superior heat preservation
Bracket materials: Molded of high-strength galvanized sheet and electrostatic-sprayed
Working principle:
1) When the temperature of the heat collector reaches the set value, the controller will make shall the circulation pump work automatically.
2) The circulation pump makes heat-conducting liquid circulate automatically.
3) The heat-conducting liquid transfers heat to water by the heat exchanger in the tank.
4) In case the temperature of the circulation pump does not reach the set value, the circulation pump will be shut automatically.
5) In case the temperature of the tank does not reach TM ax, then start the auxiliary heating device.
Feature:
Collector separates with storage tank. The tank can be put in any place of house. And the collector can be put on the inclined roof or flat place.
Module design, arbitrary combination, harmony with the building perfectly;
Intelligent control and automatic operation;
Anti-freeze: No water inside the tubes when it works.
The system controller has the anti-freezing function is that the temperature circulation will operate while it reaches the fixed temperature.
Multifunction: Bathing, washing, domestic heating etc;
Work at anytime and enjoyable.
Structure:
The split solar water heater is composed by heat collector, storage tank, controller, working station and installation parts.
Model No: 100L 150L 200L 250L 300L. 400L. 500L.