Split Pressurized Solar Water Heater - SNS17

Split Pressurized Solar Water Heater
1) When the temperature difference between solar collector and tank reaches the set value, the controller will start the circulation pump automatically, contrarily, In case the When the temperature difference between solar collector and tank do reaches the set value, the circulation pump will be shut automatically
2) The circulation pump makes heat-conducting liquid circulate automatically
3) The heat-conducting liquid transfers heat to water by heat exchanger in the water tank
4) if your tank with electrical heating system, when the temperature of the water tank does not reach Tmax, electrical heating system will start to work

Features:
It can work as usual even if one vacuum tube was broken
You can get hot water on the second floor even if it was installed on the first floor
There is two kinds type for your choose: One copper coil in tank or two copper coils in tank
It can make building have a good looks, because the collector and tank is separated, you only need install collector on roof, then put tank
Firstly, vacuum tube absorb sunlight then transfer heat to manifold by super-conduct heat pipe which has heat transfer medium in it
Manifold and tank will start to forced circulation by circulating heat pump, hotter water flow into tank and cold water flow into manifold
Two copper coil tank can be connected with others heater, such as radiator

Specifications:
Material of inner tank: SUS304
Thickness: 1.2-2.5mm
Material of outer tank shell: Colorful armor plate
Material of stand: Galvanizes the steel plate
Vacuum tube: 58 x 1, 800mm
Capacity: 100, 150, 200, 250 and 300L
Heat insulating layer: 55mm polyurethane foaming
Configuration: Closed-loop with copper coil inside tank
Pressure bearing: 7bar