Sperated Pressurized Solar Water Heater

Solar Water Heatert Working Principle

1. When the temperature of heat collector reaches the set value, the controller will make the circulation pump work automatically.

2. The circulation pump makes heat-conducting liquid circulate automatically.

3. The heat-conducting liquid transfers heat to water by the heat exchanger in the tank.

4. In case the temperature of the circulation pump does not reach the set value, the circulation pump will be shut automatically.

5. In case the temperature of the tank does not reach maximum temperature, then start the auxiliary heating device.

Solar Water Heater Features

1. The pipeline is made of red copper and conducted by heat transfer medium liquid; water can not flow in the vacuum tubes and is operated when confined; the crust uses aluminum alloy mould material of high strength with airflow design

2. Temperature preservation is equipped with standard electric water heater setting, automatic temperature control exchanger, and increased anode magnesium bars sticking to prevent furring

3. The insulating layer uses polurethane bulk bubble and has a good effect of temperature preservation

4. The product successfully carries out the installation of separation according to fabricating yard and is harmoniously blended with architecture

5. The equipments of separated solar water heater is composed by heat collector, storage tank, electric control device, hot water mix unit and fitting for circulation and installation

Solar Water Heater Working Station Component
1. Operating screen
2. Manometer
3. Pump speed adjust switches
4. Temperature difference circulation pump
5. Flow rate indicator
6. Return circuit connector
7. Safety valve
8. Expansion vessel connector9. Return circuit connector
10. Wall mounting
11. Expansion vessel: 5L, 8L, 12L, 19L, 20L, 24L
12. Pressure resistance: 10 bar pressure for expansion vessel

Solar Water Heater Specification