Solar heater
1.CE,ISO90012.7 years of manufacturing solar vacuum tubes
3.good reputation
Port: Shanghai or Ningbo
Minimum Order Quantity: 1 Set/Sets
Supply Ability: 100 Set/Sets per Day
Payment Terms: L/C,T/T
Contact SupplierPackaging Detail: 1.inner packing with foam,outside packing with standar export carton2.Special packing for sample orders
Delivery Detail: 7days for container
Solar heater
The system of solar water heater relies on a natural Principle--"Thermosiphon".
The key important point of these systems is that: the storage tank is always
located higher than the collector.
As the sun's rays hit the all-glass evacuated solar collector tubes , the
temperature of the water in the tubes rises making it less dense or lighter. and hot and lighter water naturally moves up to the top of collector and through the evacuated collector tube convert to the storage tank. This makes the colder and heavier water in water tank moves down to the bottom of the collector. that continuous displacement occurs naturally. So the users can get the hot water from the tank.
the system of solar water heater is an "Open Circuit" non-pressure system. By the air vent valve on the top of the storage cylinder and the over flow pipe in the bottom it maintains open to the air.
Materials:
Inner tank:
Imported 304 2B food grade stainless steel. thickness is 0.5mm
Outer tank:
imported nacre white armor plate or stainless steel
Insulating layer :50mm-60mm high pressure polyurethane foamed
Bracket:
premium cold roll bracket stainless steel screw
Vacuum tube:
3.3high borosilicate glass
1)The vacuum tube of our solar water heater has the high absorption rate and low emission rate,
2)the absorption rate is 0.90-0.93 (AM1.5)
3)the emission rate is 0.05-0.075 (80±5)
4)vacuum tightness is P≤5.0*0.0001Pa
5)idle sunning property parameters is Y=220-260./KW
6)the average heat loss coefficient is Ult=0.6-0.7W(.)
7)It means the temperature in the water tank is range from 50 to 95.
Characteristic
1. Best angle of stand makes the heat efficiency is very high .
2. All of the inner tank is produced by high-frequency ring welding or
argon arc welding, which is very durable; high density
3.The insulating layer made of high pressure polyurethane foamed
4.The water inlet or out let can be set up as your asked.
5.Intelligent controller or electrical heat element can be choosed for
this system.according to your requirement.
6.Advanced technology ,which can dispose of scale ,bacteria and prevent electricity
7.environmental friendly