Solar demestic hot water heater
1.without assistant tank
2.hot water first for all the time
3.install on the ground
Port: Shanghai
Minimum Order Quantity: 2 Set/Sets sample is available
Supply Ability: 3000 Set/Sets per Month one day fpr sample
Payment Terms: L/C,T/T
Contact SupplierPackaging Detail: standard export package
Delivery Detail: within 15 days
Solar demestic hot water heater
Skylight Evacuated Tube Specifications:
1. Length (nominal):1800mm
2. Outer tube diameter: 58mm
3. Inner tube diameter: 47mm
4. Glass thickness:1.8mm/2.0mm
5. Thermal expansion: 3.3x10-6°C
6. Material: Borosilicate Glass 3.3
7. Absorptive Coating: Graded Al-N/Al
8. Absorptance: >93% (AM1.5)
9. Emittance: <8% (80°C)
10. Vacuum: P<5x10-3 Pa
11. Stagnation Temperature :>200°C
12. Heat Loss :< 0.8W/ ( m2°C )
13. Maximum Strength: 0.8MPa
14. Start-up temperature:≤25°C
15. Anti hail:≤Ø 25mm
16. Weight: 2.2kg
17. Skylight Package: 1880*330*170(10pcs)1880*280*170(8pcs)
18. Special tube like 100mm or 120mm tubes are also available against request
Tank and Frame Specifications:
1) Volume: 100L, 150L, 180L, 200L, 220L, 250L
Inner tank material and thickness: SUS304 2B /1.2mm
2) Outer shell material and thickness: Color steel/0.5mm OR SUS304/0.5mm
3) Insulation material and thickness: CFC free Polyurethane/55mm
4) Frame material and thickness: Galvanized steel/1.5mm OR SUS304/1.3mm
5) Size of the holes: G1/2 OR G3/4
6) Electrical heater: Available against request, 1500W, 2000W or 3000W
7) Magnesium rod: Available against request
8) Controller: Available against request: SP25, SP26, SPI, SPII, SPIII
9) Guarantee: 3 years for galvanized steel support, 5 years for solar storage tank and evacuated tubes
Specification of Evacuated Tube
Length (nominal) | 1800mm |
Outer tube diameter | 58mm |
Inner tube diameter | 47mm |
Glass thickness | 1.8mm |
Thermal expansion | 3.3x10-6oC |
Material | Borosilicate Glass 3.3 |
Absorptive Coating | Graded Al-N/Al |
Absorptance | >93% (AM1.5) |
Emittance | <8% (80oC) |
Vacuum | P<5x10-3Pa |
Stagnation Temperature | >200oC |
Heat Loss | <0.8W/ ( m2oC ) |
Maximum Strength | 0.8MPa |
Start-up temperature | ≤25°C |
Anti hail | ≤Ø 25mm |
Weight | 2.2kg |
Package | 1930*330*170(10pcs)1930*280*170(8pcs) |
Tank and Frame Specifications
Inner tank material and thickness | SUS304 2B /1.2mm |
Outer shell material and thickness | Color steel/0.5mm |
Insulation material and thickness | CFC free Polyurethane/55mm |
Frame material and thickness | Galvanized steel/1.5mm |
Heat pipe wall thickness | 0.6mm |
Length and diameter of condenser | 55mm/14mm |
Start up speed | 30S |
Start up temperature | 25oC |
Working Principle
EVACUATED tubes are the absorber of the solar water heater. They absorb solar energy converting it into heat for use in water heating. Evacuated tubes have been invented in China by Professor Yin Zhiqiang and have already been used for years in Germany, Canada, China and the UK. There are several types of evacuated tubes in use in the solar industry. Skylight uses the most common "twin-glass tube". This type of tube is chosen for its reliability, performance and low manufacturing cost.
EACH Skylight evacuated tube consists of two glass tubes made from extremely strong borosilicate glass. The outer tube is transparent allowing light rays to pass through with minimal reflection. The inner tube is coated with a special selective coating (Al-N/Al) which features excellent solar radiation absorption and minimal reflection properties. The top of the two tubes are fused together and the air contained in the space between the two layers of glass is pumped out while exposing the tube to high temperatures. This "evacuation" of the gasses forms a vacuum, which is an important factor in the performance of the evacuated tubes