Pressurized Solar Water Heater, instant heating,pressurized hot water outlet,longer temperature conservation,longer life span.
Port: Shanghai,Ningbo
Minimum Order Quantity: 30 Set/Sets 20ft container
Supply Ability: 300 Set/Sets per Week week
Payment Terms: L/C,T/T
Contact Supplier
Packaging Detail: Foam Cartons
Delivery Detail: 20 days
Pressurized Solar Water Heater:
Fluid in the copper heat pipe as heat exchanger,which can start to work in the very short time .The vacuum tube solar collector is absorb the solar rate and transfer the the heat to the copper pipe by the aluminum heat conducting sheet inside the vacuum tube.Then the fluid changes from liquid into vapour by heating and goes up by inside the heat pipe.After exchanging the heat between the condenser end of the heat pipe with the water in the storage cylinder ,the fluid turns into liquid again and goes down to the base of the heat pipe.By this circulation,the water in the storage cylinder is heated by the heat pipe.when hot water is used,cold water will be supplied from the bottom of the storage cylinder.In this system,there is no water flowing in the vacuum tubes,so it is specially usd in the frost area.
This is a pressure system that the storage cylinder and the heat pipe are closed mechanically.Although there are some evacuum tubes broken,the whole system cam still work normally.It has very good antifreezing performance .The heat pipe won't be frozen at the temperature 10degree below zero.and the liquid in it will remain liquid state.
This series solar water heater uses good quality of borosilicate glass vacuum tubes,with selective coating AL-N/AL as collector ,which the heat efficiency is very high,the abou the sylinder ,the inner is 1.5mm 304 2B food grade stainlees steel,it is welded by argon arc protecting welding .which is very durable,high dencity of polyurethane poam keep the heat in the cylinder in good condition.Each cylinder will be tested before deliever out of the factory.Its tested pressure is 1.2MPA (12bar).And the operation pressure is 0.6MPA (6bar).
Model No.: TYF233
Features: solar water heater
1.large capacity
2.high quanity
3.high effective and low pollution
Model No.: sn-np012
Features: separate pressurized solar water heater
1. High efficience performance
2. Certificate:CE,ISO,CCC
3. OEM provide
Model No.:
Features: Solar hot water system, all stainless steel material, good anti-rust function, save your bill on gas and electric.
Model No.: YJL-AT-A8
Features: Solar hot water
1 Auto filling water
2. Steady aluminium alloy frame resist heavy wind
3. ISO9001:2000/CE
4. OEM offered
Model No.: Public
Features: Stainless Steel Solar Water Heaters
1.All SS material, best anti-rust
2. 140-158 F degree hot water ,Solar Water Heaters
Model No.: ADL
Features: solar water collector
1.It still can work in- 35 degree low temperature
2.Energy saving
3.5 years warranty,15 years life time
Model No.:
Features: the stainless water tank guarantee its long life span than normal tanks,It is more effectve in anti-corrosion
Model No.:
Features: Regular solar water heater ,Capacity 100 liter-360 liter,durable and stability performance.
Model No.:
Features: Solar energy,capacity 100Ltr-300 Ltr, optimal selection for family use, ISO9001 & SGS certificate available.....
Model No.:
Features: solar water heating system
1:Higher conversion efficiency
2:easy installation
3:professional manufacture
4:5 years warrantly
Model No.:
Features: solar geyser
1:Higher conversion efficiency
2:easy installation
3:professional manufacture
4:CE ISO9001:2000
Model No.:
Features: vacuum tubes solar water heater
1)ISO9001, CE, CCC certificate
2)high efficiency
3)green and economical