(Solar Keymark,SRCC,CE)Compact high pressure heat pipe solar heater - Micher-M470-58-1.8-30

Compact high Pressure Heat Pipe Solar Heater

Working Principle

1.Solar energy is absorbed by the vacuum tubes, and transferred to heat-pipe by aluminium fin.

2.Then heat energy will be concerntrated to the condenser zone which is in the end of heat-pipe, by medium inside pipe.

3.The condenser zones are extended into inner tank. So water around them will be heated. Then step1, step2, again.

4.In this way, after times repeat, the water in tank getting hot and you can enjoy a bath or something else.

Main material and major element:

A.Inner water tank:SUS304-2B food-level stainless steel by auto welding, 1.5mm thickness

B.Outer water tank: white color plate 0.4mm thickness

C.Bracket:galvanized steel plate with plastic spraying 1.5mm thicjness

D.Heat Preservation :imported polyurethane, best density of 38 kg/m³, 55mm thickness, without freon

E.Vacuum tube's coating: Cr-Al-N/Al/Cu(three-target type)

Features:

1.High efficient: Advanced heating transferring type heat pipe with excellent selective absorbant coating.

2.Anti-freeze: 55mm thickness imported polyurethane integral foaming, Could bear even minus 35 degrees Celsius and works normall under extremely situation.

3.Energy saving and environment friendly:Taking advange of solar energy, one time cost, free for the rest, and no pollution

4.Stable and reliable: Perfect wind resistance

5.All weather hot water supply: Can be backup with auxiliary electric heating device, supplying enough hot water during bad weateher days.

Application area:

In some countries such as Italy, Spain, Portugal, Russia and other European countries, the integrative pressurized solar water heaters are warmly welcomeed, the biggest advantage is anti-freezing in cold area.

Types provided:

Pictures related:

We also can produce according to your requirements!