Separator Pressure Solar Water Heater - sx10300

Split pressurized solar water heater Features:
1) It can withstand pressure of tap water when it works
2) There is no need to wait
3) Completely automatic operation
4) Drinking water quality to promote life quality
5) Temperature preservation can last for 80 hours
6) Without volatile tubes
7) Without incrusting, long usage life
solar water heater
Specifications:
1) outer tank material: Painted steel sheet
2) inner tank: Sus304-2B
3) Coil material: Copper
4) Water capacity: 100L, 150L, 200L, 240L, 300L
5) Pressure: 0.6mpa
6) Heat preservation: 72h
7) Hail resistance: 25mm
8) Tube standards: 14, 16, 18, 20, 24, 30, or 36 Heat Pipes with 58mm-1800mm or47mm-1500mm
9) Manifold: Outer: Aluminium alloy, inner: Rock wool with red copper pipe

Separated solar water heater (heat pipe solar collector )Working principle:
1) When the temperature of the Separated solar water heaterheat collector reaches the set value, the controller will make shall the circulation pump work automatically.
2) The circulation pump makes heat-conducting liquid circulate automatically.
3) The heat-conducting liquid transfers heat to water by the heat exchanger in the tank.
4) In case the temperature of the circulation pump does not reach the set value, the circulation pump will be shut automatically.
5) In case the temperature of the tank does not reach TM ax, then start the auxiliary heating device.
solar water heater
Separated solar water heater Feature:
Split solar water heater Collector separates with storage tank.The tank can be put in any place of house.And the collector can be put on the inclined roof or flat place.
Module design, arbitrary combination, harmony with the building perfectly;
Intelligent control and automatic operation;
Anti-freeze:No water inside the tubes when it works.
The Split solar water heater system controller has the anti-freezing function is that the temperature circulation will operate while it reaches the fixed temperature.
Multifunction:Bathing, washing, domestic heating etc;
Work at anytime and enjoyable.
solar water heater
Separated solar water heater Structure:
The split solar water heater is composed by Split solar water heater heat collector, storage tank, controller, working station and installation parts.
Split solar water heater Working principle:
1) When the temperature of the heat collector reaches the set value, the controller will make shall the circulation pump work automatically.
2) The circulation pump makes heat-conducting liquid circulate automatically.
3) The heat-conducting liquid transfers heat to water by the heat exchanger in the tank.
4) In case the temperature of the circulation pump does not reach the set value, the circulation pump will be shut automatically.
5) In case the temperature of the tank does not reach TM ax, then start the auxiliary heating device

Pls feel free to contact us!