Separated Solar Power Water Heater

Specifications and Product Details:

A 50/50 propylene glycol and water mixture from the collectors through a coil of pipe in the solar tank, and then is pumped back through the collectors. The potable water is warmed by heat transfer through contact with the pipe. These systems are pretty much the only choice in very cold climates. When there is not enough energy for sun, an electrical or gas back up element will be automatically switched on by controller.

Feature:

Simple Installation,No Maintenance,Effective operation

Easy Retrofitting To Existing systems

Suitable for single and multiple solar heating Application systems,

Preferred option for extremely cold areas and questionable water quality.

Incoming potable water is routed to the solar storage tank

Porcelain Enemal or SUS316 Stainless Stee Storage Tank With Electrical or gas Back Up

Double-walled Copper Coil heat exchangers in storage tank prevent contamination of household water.

Systems Specifications: >>>

Model	Tank Capicaty	Heat pipe or U Pipe Collector		Work Station
Model	Tank Capicaty	Φ58X1800	No.	Work Station
SHCLS150S	150L	Φ58X1800	15(1 collector for 15 tubes)	A circulating unit system that gather controller and pump station
SHCLS200S	200L	Φ58X1800	20(1 collector for 20 tubes)
SHCLS300S	300L	Φ58X1800	15X2 (2 collector for 15 tubes)
SHCLS400S	400L	Φ58X1800	20X2 (2 collector for 20 tubes)
SHCLS500S	500L	Φ58X1800	15X2+20X1 (2 collector for 15 tubes, and 1 collector for 20 tubes)

Application

1.Close loop system with electrical/gas back up

Closed Loop Solar Heating Systems are suitable for single and multiple solar heating

Application systems, e.g. domestic solar water heating, solar water heating hot tub, solar

Swimming pool heating or solar space heating systems. The Closed Loop Solar Systems

suitable for areas with questionable water quality and all climate conditions. The Closed

Solar Heating Systems are the preferred option for extremely cold areas. When there is

not enough energy for sun, an electrical or gas back up element will be automatically

switched on by controller.

If you have taken steps to retain your pools heat but are still not happy with your heating bills, or if you plan to install a new pool, a solar pool heater may be a good investment. Such heating systems are one of the most cost-effective applications of solar energy. It is relatively simple to integrate a solar water heater since most pools require a pump, filter, and plumbing.With a solar energy system, the pools water is pumped through the filter and then through a solar energy collector(s) instead of directly back to the pool. The sun heats the water in the collector(s) before it returns to the pool.

If you add a solar heater, you may need a pump larger than your present one, or a

separate, smaller pump to pump the pools water to and through the solar collectors. Adding any heater, solar or otherwise, will preclude selecting the smallest pump. Nevertheless, you also may reduce pumping time to help cut costs.

The solar collector System is capable of contributing significantly to space heating requirements in many areas. The best use for solar energy is to heat a building by radiant under floor hydraulic heating, which requires water at a temperature of around 60C. This system usually uses a concrete floor slab with special water pipes running through it, to provide a pleasant, even, low temperature radiant heat. The floor slab will also provide heat

If any interest,do not hesitate to contact my luckyjenny2 skype account.Or call me on 0086-13401342073.