1.ro system
2.water purifier system
3.water filtration system
Port: shenzhen,guangzhou
Minimum Order Quantity: 20 Piece/Pieces
Supply Ability: 50 Piece/Pieces per Day
Payment Terms: T/T,Western Union
Contact SupplierPackaging Detail: one piece .
Delivery Detail: within 7days
Basic parameters of the product:
Voltage rating Rated:220V
hydraulic pressure :0.10-0.70MPa
Power rating Rated :28.8W
water temperature:5-45°C
Daily water yield:75gallon/24h(283L)
Water storage tank:3.2G
Raw water limit volume:≤1000PPM(TDS)
Inflow hardness :≤ 180PPM
Wash method:Automatically
Inflow quality: Municipal tap water
Gross weight of the product:16 kg
Configuration: host(anti-osmosis); Water storage tank; Installation Manual; luxury trident tap/hanging slice; PE pipeline; filter bottle / membrane wrench; tee joint/ball valve; pipe plugs / nuts;
(Characteristics of the product; The first three levels adopt giant T33 unified filter element whose performance is stable with a huge water yield, automatically washing and pollution release function, explosion-proof filter bottle, imported fluid film and mute pump.)
Technological process: (replacing cycle of each filter element noted below is just for reference, the specific replacing cycle is determined by local water quality)
Level one:melt-blown PPF filter element: filtering accuracy: 5 um - 1 um, resistance to weak acid, weak base, and most organic solvents and inorganic solvents. Mainly used to remove: suspended solid, silt, rust, colloid, hairline, etc. (replace it every 3 to 6 months)
Level two:Filter element with granular activated carbon: absorption rate up to over 800 iodine values, mainly remove organic chemical carcinogen such as abnormal color, peculiar smell, residual chlorine, agriculture chemical, haloform, carcinogen, etc. (replace it every 6 to 12 months)
Level three: Compressed activated carbon: setting absorption, filtration, intercept and catalyst in one can effectively remove the organic chlorine and other radioactive material in the water, and also can decolourize and remove peculiar smell. (replace it every 6 to 12 months)
Level four:Specification of 75G Fluid Film
Name: home water purifier (RO)
Specification:100 gallons
Salt rejection:>99%
over Filter fineness:0.0001um
Water pressure range:3~8.6ba
Most adequate inflow temperature:5~40°C
Maximum operation pressure:125psi (0.86MPa)
Maximum inflow volume: 2gpm(0.45m3/hr)
PH value range: 3.0 ~ 10.0
Maximum residual chlorine concentration: 0.1 mg/L
Service life: approximate 24 to 36 months (determined by water quality and using condition)
Characteristics: filter fineness of ultramicro bore diameter is 0.0001 UM; huge water yield; less waste water and long service life
Of super and a high pressure pumps work, and ion of minerals elements against infiltration by a film, and dissolved in water most of the metal and organic substances and germs, virus, we cannot swim against the penetration through the film has been withheld. in principle against infiltration water, will be contained in the pure substances such as hot not the original, filtering of bacteria and viruses and toxins, chemical, metal ( of arsenic and cobalt, such as cadmium, mercury ) substances, metals, and ion salt. swim, including human health material, Against infiltration by impurities in the isolation and create pure water.
Level five: the little t33 activated charcoal, to curb the bacteria reproduce, adjust the quality of drinking water and achieve national standards. ( 1-2 years to replace )