Printed Glass - GVG

Printed Glass

The equipment and technology used in the manufacture of this glass are from Italy, and allow us to print different colored inks through silk-screen printing onto float glass prior to tempering, so that the printing ink becomes part of the glass surface. After the tempering, the silk-screen printing is free from pollution, will not fade, maintains its beautiful color, and can replace ground glass, and colored pattern glass.

Gevergel (Foshan) engineering glass co.Ltd. (GVG) is a famous sole foreign investment enterprise, providing service for glass processing and engineering project which have good reputation in China.

Adopting traditional European glass techniques, gathering experts in glazing line and geting professional ideas from foreign consultants, GVG is capable of providing all-around service of glass processing and glazing engineering.

GVG introduces in advanced managing mode which advocates enterprise culture of people-centered, constructing

company area network, implementing computerized management.

GVG brought in effective system of management from European glass industry, concentrating capable persons in the glass line and bringing in domestic and international advance technology.

GVG coated glass production line is imported from Germany LEYBOLD, tempered glass production line from Finland TAMGLASS, automatic cutting machine and automatic double edge grinding machine from Italy BOTTERO.

The company has qualified not only CCC safety certification of China and the ISO9001 quality system certification, but also BS6206 Tempered glass check standard of England and the AS/NZS2208 laminated, tempered, and insulated glass check standard of Australia. The various properties of products can suit to various requirements from national standard of Japan, America and Europe.

tempered glass is a type of glass that has increased strength on the surface by the physical or chemical treatment on the ordinary glass and increased the tensile stress inside the glass so that this kind of glass has increased the mechanical strength and the heat-resistant impact strength, so collectively called Ttempered glass which can also be classified into full tempered glass and half full tempered glass (also called HOT-REINFORCED GLASS) in terms of the different treatment degrees.

Full Tempered Glass Property

The intensity of tempered glass is 3-4 times of ordinary glass and the surface stress is more than 90MPa; when it is destroyed by external force the stress is instantaneously released subject to the reaction of the internal tensile stress, so the whole piece of glass completely becomes pellets with no sharp angles, which will greatly reduce the possibility of the body injury; and the Full Tempered Glass can resist the acute change of extreme cold and hot temperature.(The 5mm tempered glass approximately may bear 200 degrees temperature changes.)

Half Tempered Glass Property

The intensity of half tempered glass is 2-3 times of ordinary glass with the surface stress between 24 and 69MPa; when it was destroyed by external force, the crack starts to extend to side from where it is destroyed but most of parts of glass still keep in frame that avoids or reduces body injury; Half Tempered Glass is also characterized by advantages of the ordinary plate glass and the Tempered Glass, but with higher intensity than the ordinary plate glass and keeping the flatness between both of them without spontaneous explosion.

Application of tempered glass

Buildings need safety glass; windows and other parts of façade; glass bar and elevator; windows for vehicles and ships, Desks and displaying frame, inside decoration and furniture that easily breaks.