Pressurized Solar Water Heater(GTINP-NT5818) - GTINP-NT5818-12

Solar Water Heaters

Pressured Vacuum Tube Solar Water Heater with High Efficiency

Inner and outside water tank shell materials: 304 food-grade stainless steel plates;

Water is pure and drinkable Heat insulation of water tanks adapts polyurethane foam;

Silicone rings to connect and seal;

Tubes and supports are adjustable;

Power bearing is average and can assure vacuum tubes to use for long time;

Whole glass vacuum tubes adapts super hard borax and silica glass;

Electrical appliances are used to aid heating and switch-off power supply before bathing OEM orders are welcome

Detailed Product Decription:

Working Principle:
Pressured Vacuum Tube Solar Water Heateralso relies on the natural circulation of water between the collector and the tank (that is tubes absorb solar energy, and heats the water inside the tube, hot water rises, cold water flows down).
It differs from compact pressurized solar water heater because it gets a copper coil inside the inner tank. The hot water rises from the tube into the tank, and heats the copper coil and finaly heats the water inside the copper coil. Therefore the water tank is just as heat storage tank. So the hot water we use is actually from the copper coil, it'is more clean, and even drinkable(as the copper can purify the water. ).

Specifications:
1)inner tank: Stainless steel(SUS304-2B) with 0.5mm-1.0mm thickness
2)Outer tank: Stainless steel 202, 304 or Galvanized steel alloy with 0.4mm thickness;
3)Tank capacity: 150L/200L/250L/300L
4)Vacuum tube: 58mm/1800mm;
5)Frame: Aluminium 1.2mm thickness or Printed galvanized steel 1.5mm thickness
6)Assistant Tank: 5L or 8L;
7)Copper coil: : 12mm/thickness 1.0mm
8)Heat insulation layer: Polyurethane with 50-60mm thickness
9)Certificates: CE, ISO9001(2000), CCC, SGS
10)Warranty: 3years for full system.