Pressurized Flat-plate Solar Water Heater Collector
1.Flat-plate Solar Water Heater
2.Pressurized Solar Collector
3.Solar
Price Terms:FOB,CIF,EXW
Payment Terms: T/T,Western Union,MoneyGram,L/C
Minimum Order: Negotiatable
Delivery Port: Customized
Contact Supplier
Packaging Detail: Common cardboard with hard PU foam inside.
Delivery Detail: 12-15 days after payment done
Pressurized Flat-plated Solar Water Heater
Flat-plate Solar Water Heater
Pressurized Solar Collector
Solar
key features:
1 Choosing advanced absorptive coating,using best heat conductivity TU1 material as heat collecting board,guaranty high heat absorption and transformation efficiency;
2 Specific technology and complete sealing design,maximum heat can be stored into the water box;
3 Thick glass wool insulation can guaranty maximum thermal reservation;
4 Handpicked strong intensity cover glass,can resist 25mm diameter hail attack;
5 Handsome appearance,be integrated with the architecture;
6 Easy installation,could be installed on the roof with any slope,on the balcony or hung on the wall.
Specifications:
Operation Pressure : 0.4MPa/Blue paint:0.6MPa
Testing Pressure : 0.8MPa/Blue paint:1.2MPa
Casting: Anodized Aluminum
Insulation material 40-45mm Glass wool layer/Fiberglass
Glazing: Normal float 4mm
Absorber coating: black chrome/blue titanium coating
Size(mm)out line: L1500(1600) x W1000 x H96mm , L2000 x W1000 x H96mm
Collector area: 1.50 m2 (1.60m2) and 2.00 m2
Copper-aluminum alloy tubes: Ø10mm xT0.5mm x 10pcs /
Blue paint: Ø8mm,thickness:0.75mm
Copper header: Ø22mm x 0.6mm x 1060mm / Blue paint: Ø22mm,thickness:0.8mm
Aluminum Absorber Fin: 110 x 0.35mm x 1385mm x 10pcs,110 x 0.35mm x 1845mm x8pcs
Side Insulation : 20mm fiberglass layer
Frame Aluminum alloy or others Frame color silvery or bronze-coloured
Glass 4mm tempered glass with iron oxide
Backing sheet: 0.4mm steel galvanized material/Aluminium plate
Sealing profile: EPDM Leak-proof protection: EPDM
Model No.: JNIP
Features: JNIP- Integrative heat pipe pressurized solar water heater
1) Can endure 6 bar pressure;
2) With heat pipe vacuum tubes
Model No.:
Features: When water flows though the coil, it absorbs heat from the water inside the solar
Model No.: LS
Features: Copper Coil Exchanger Solar Water Heater 200L
1.Copper Coil Exchanger
2.Solar Water Heater
3. Copper Pipe
Model No.:
Features: Split Solar Water Heater
1.OEM available
2.Intelligent operation
3.High efficiency
4.It works even freezing -36
Model No.:
Features: 1. CE, SGS, CCC, ISO, DIN12976
2. OEM & Small orders available
3. Competitive price of solar heating;
4. Solar rebates.
Model No.: SP-N01/2
Features: solar system for hot water
2. With 5L assitant tank
3. Inner tank SUS304 2B 0.5mm thickness
4. Competitive price and quality.
Model No.: JDL-two-20-58/1.8
Features: Optimized design
The special of this new type solar water heater is inner tank which designed with two independent inner tan
Model No.: EM-S01
Features: the heater collector split with the water tank,so the install is very flexible,suitable for the villa.
Model No.: SLC-300/30-5818
Features: water heater solar
1.Pressure water
2.Clean water
3.Low maintain
4.Good performance in winte
Model No.: Solar Water Heater
Features: YUNWU Solar Water Heaters YW-H
minimum 90 L
High quality and low price
SUS304-2 B
Different style
Model No.: SPR series
Features: Thermosyphon solar water heater 50-300L
Inner tank: stainless steel 304 0.4mm
Outer tank: 0.4mm
5 years warranty
Model No.: JX-IP/58*1800/8
Features: SUS-304-2B Stainless Steel Solar Water Heater
1.SRCC,Solar Keymark/ En-12975,CE SGS,
2.100000Btu/day based on 1000w