Pressurized Copper Coil Solar Water Heater - MC-NF-4715-20

Pressurized Integrative Copper Coil Solar Water Heater

pressurized solar water heater data :

SS serials is Thermosyphon solar water heater, That is a kind of solar water heating system that solar collector and storage are connected together with the cylinder storage on the top and collector panel on the bottom. There is no need of pump to push the fluid and no need of pipeline between the collector and storage. It is a simple and safe solution

to get heat power from the sun.

This type of solar water heater provides mains pressure pre-heating via a highly effective copper coil heat exchanger located within the solar collector tank. The way in which the mains pressure solar collector heats water is the same as the non pressure solar collector.Rather than using the water in the tank directly,as the non pressure does, this type uses a 45m~60m copper coil.

Heat exchanger inside the tank provides more than 1.5m2 of heat transfer area. When water flows through the coil it absorbs heat from the water inside the solar collector tank. The solar collector tank is therefore a thermal store.

Advantage:

1) The material of the outer tank is SUS304 2B stainless steel. The material of the inner tank is SUS304 2B stainless steel.

2) The life of the vacuum tubes is 15 years.

3) Stable and reliable performance, well resistance.

4) Temperature when exposed to sun without water: 250°C, 2.5 hours to boiling point if using single tube.

5) It resists 25mm hail.

6) Heat preservation: 72 hours.

7) optional accessories: assistant tank, electric heater

8) 5 years warranty.

The features of pressurized copper coil solar water heater (SPHE):

1. With CE, ISO certification.

2. High quality copper coil heat exchanger, which can transfer the heat energy efficiency.

3. Long life-span. No need extra after installation.

4. Easy operation.

5. Heat exchanger material---14mm diameter*1mm thickness copper coil.