Pressured Flat solar energy collector with CE and Keymark - Engineering type

Advantages of Sixth-Generation Solar Collectors:

1 The TiNOX plated aluminum imported from Germany is applied with an emissivity<0.05(80°C) and a absorption ratio of 0.95.

2 The coiling tubes are applied to prevent water leakage with a strong pressure bearing capacity.The testing pressure of the system has reached 1.8Mpa.

3 The products have a better stable performance due to the application of the ultrasonic plate welding equipments imported from the US.

4 The application of the entire Freon-free foaming technology has provided a better insulation performance while the back is applied with the anodized patterned aluminum plates to provide a better service life.

5 The low-iron high-emissive (the emissivity≥93%) frosted toughened glass is applied.

6 The whole frame has applied the bending connection and aluminum strips for sealing,which looks more beautiful.

ZMS Flat solar energy collector:

Patented low-iron content,tempered and textured glass is adopted for the face covering of the fiat plate solar power water heater.It doesn’t contact with the heat receiver directly,so there is no scaling problem ;through special coating treatment,surface of the glass of the solar collector is easy to wash and maintain,particularly for a large area of solar plate groups,where the piping shower system can be used to collectively wash away dirt to ensure clean glass surface and increase the rate of solar transmission.

The world’s leading level high selective absorbing coating is adopted for the core of the all-red copper collector plate core;marine grade aluminum housing is adopted to ensure long life of outdoor use.You do not need to worry about rust or corrosion of the plate;the material adopted for the fiber insulation layer with a thickness of over 3cm can reduce heat loss effectively;special solar collector glass is adopted with high solar power transmittance rate≥93%,metting ANSI1297-1-1975,BS6206A,ENI2975-2,GB/T6424-1997,GB/T4271-2000 and JISR3206 standards;It has high resistance to shock, and its toughness meets AS2208-1978 and U.S. federal standards.